1
Download 1. m100eh documentation
Transcript
APPENDIX A-1: M100EH Software Menu Trees, Revision C.0 Model 100EH Manual Addendum SETUP . ENTER SETUP PASS: 818 CFG DAS ACAL1 RNGE PASS COMM HESN2 ID <SET COM1 COM2 SET> EDIT See Fig A-5 VARIATION TYPE 1 TYPE 2 PREV RESPONSE MODE BCC NEXT TEXT INS STATUS FLAGS CMD DEL YES GAS LIST EDIT PRNT Select from list of available gases (see Section 6.12.4.6). NO SO2, 110, REPORTED GAS TYPE GAS ID REPORTED ON OFF Figure A-7: 05244 Rev C.0 Set Hessen ID number for selected gas type (see Section 6.12.4.6). CLK MORE VARS DIAG See Fig A-5 See Fig A-8 PMT DET WARNING UV LAMP WARNING DARK CAL WARNING IZS TEMP WARNING BOX TEMP WARNING PMT TEMP WARNING RCELL TEMP WARNING SAMPLE FLOW WARNING SAMPLE PRESS WARNING VACUUM PRES WARNING HVPS WARNING SYSTEN RESET REAR BOARD NOT DET RELAY BOARD FRONT PANEL ANALOG CAL WARNING CANNOT DYN ZERO CANNOT DYN SPAN INVALID CONC ZERO CAL LOW SPAN CAL SPAN CAL MANUAL MODE PPB PPM UGM See Table 6-27 for MGM Flag Assignments 1 Only appears if a valve is installed. 2 Only appears when the HESSEN mode is enabled for either COM1 or COM2. Secondary Setup Menu - HESSEN Submenu Pg: A-8
