1
Download 1. m100eh documentation
Transcript
Model 100EH Manual Addendum Table A-6: APPENDIX A-5: M100EH iDAS Functions, Revision C.0 M100EH iDAS Functions, Revision C.0 NAME PMTDET DESCRIPTION UNITS PMT detector reading mV UVDET UV lamp intensity reading mV LAMPR UV lamp ratio of calibrated intensity % DRKPMT PMT electrical offset mV DARKUV UV lamp electrical offset mV SLOPE1 SO2 slope for range #1 — SLOPE2 SO2 slope for range #2 — OFSET1 SO2 offset for range #1 mV OFSET2 SO2 offset for range #2 mV ZSCNC1 SO2 concentration for range #1 during zero/span calibration, just before computing new slope and offset PPB ZSCNC2 SO2 concentration for range #2 during zero/span calibration, just before computing new slope and offset PPB CONC1 SO2 concentration for range #1 PPB CONC2 SO2 concentration for range #2 PPB STABIL SO2 concentration stability PPB STRLGT Stray light reading PPB RCTEMP Reaction cell temperature °C PMTTMP PMT temperature °C SMPFLW Sample flow SMPPRS Sample pressure “Hg VACUUM Vacuum pressure “Hg BOXTMP Internal box temperature HVPS High voltage power supply output TEST8 cc/m °C Volts Diagnostic test input (TEST_INPUT_8) mV TEST11 Diagnostic test input (TEST_INPUT_11) mV TEMP4 Diagnostic temperature input (TEMP_INPUT_4) °C TEMP5 Diagnostic temperature input (TEMP_INPUT_5) °C TEMP6 Diagnostic temperature input (TEMP_INPUT_6) °C REFGND Ground reference (REF_GND) mV RF4096 4096 mV reference (REF_4096_MV) mV 05244 Rev C.0 Pg: A-23
