Download OLI ESP User Guide - OLI Support Center

Transcript
In Chemistry Model, the user provides a simple description of the molecular species involved in the
chemical system to be simulated. The system includes the solution, the metal, and the titrants which will be
used to general pH studies on the solution.
Once a Chemistry Model is built, it can be used for all simulation studies that use this chemistry with this
metal.
In CSP Stability, the user enters more detailed information about the solution, particularly the temperature,
pressure, and composition. The amount of the metal to be studied in relation to the solution, unless the
metal is specifically present in the solution, is not a concern. Once the solution chemistry is defined, the
user can generate different types of phase stability diagrams which describe the behavior of the solution in
contact with the metal of interest.
In Summary, the user will be able to receive printed output or export data to another software package.
OLI ScratchPad and Surveys
From within CSP Corrosion, the user has access to ScratchPad and Surveys with respect to the stream or
solution of interest. These facilities allow the user to perform additional single or multiple point
calculations. Such calculations include: isothermal, adiabatic, set pH, bubble point, dew point for
ScratchPad, and temperature, pressure, composition and pH surveys for Surveys.
OLI ESP User Guide
Overview • 30