Download PR0769-3

USER'S MANUAL
(3)Replacing Method
When CAD-5411S-570 gets out of order, the whole system may be affected. So, repair it promptly.
To make repair works promptly, we recommend you to prepare spare equipment for replacement.
・Before replacement, stop the system and turn off the power supply to prevent electric shock and
any accident.
・hen imperfect contact is supposed, wipe contacts with clean pure cotton cloth moistened with
industrial alcohol.
・At the time of replacement, reset the internally stored data and switch setup to the state
before the replacement.
・After the replacement, make sure that the new equipment is also in order.
・Return the removed defective equipment to us for repair together with a report detailing defects.
10-2.Storage and Disposal
(1) Storing
Store the
・Indoors
・A place
・A place
・A place
・A place
・A place
・A place
Method
CAD-5411S-570 in the following environment:
(where the controller is not exposed to direct sunlight).
where ambient temperature and humidity satisfy the specification.
free from corrosive gas and inflammable gas
free from dirt, dust, salt and iron powder.
where the product body is protected from vibration and shock.
not exposed to splashes of water, oil or chemical.
where no one can get on the product and place any substance on it.
(2) Disposing Method
Dispose the product as an industrial waste.
- 93 -