Download AFS-16-1 - RJ45 Daten-Fallback-Switch

Operation via SNMP
13.5. Viewing AFS Status via SNMP
Status of various components of the AFS can be retrieved via SNMP. Circuit Status, and
Environmental Status are currently supported.
13.5.1. System Status - Ethernet Port Mac Addresses
The Mac Address for the Ethernet Port can be displayed using the command below:
• environmentUnitTable::environmentMacEth0 The Mac Address for
Ethernet Port 0.
13.5.2. Circuit Status
The status of each circuit in the system can be retrieved using the command below.
• circuitTable::circuitStatus – The status of the circuit.
0 Switch Position B
1 Switch Position A
155 No Circuit Installed in this Slot
• circuitTable::circuitReason – Returns a numeric code, which describes the
reason for the last successful A/B switching operation as follows:
0
1
2
3
4
5
6
Power Up
User
PNA
External Alarm
Circuit Switch
Control Switch
Demo
13.5.3. Unit Environment Status
The temperature status and Control Module Jumper status can be retrieved. The
environmentUnitTable contains one row.
• environmentUnitTable::environmentUnitTemperature – The temperature
of the AFS unit.
• environmentUnitTable::environmentUnitName – Returns the specific
model number for the AFS unit.
• environmentUnitTable::environmentUnitMonitorAlarm – Returns the
current state of the Monitor Input Signal.
0
1
Monitor Input Signal is Low.
Monitor Input Signal is High
13-4