Download OptionC User Manual

Transcript
Option C User’s Guide
How to Enter and Display Project Data
3 HOW TO ENTER AND DISPLAY PROJECT DATA
This chapter will describe in detail how to enter data and other relevant project information. It
will also provide a description of the charts generated that will allow you to do year to year
comparisons, identify annual patterns or contrast different types of utilities.
3.1 PROJECT DATA PANES
At the project level, two tabs, Project Details and Charts, will appear in the main screen to allow
you to enter relevant information or to examine project data.
3.1.1 Project Details Tab
Figure 3.1 shows the Project Details tab for a new project. Typically the project information tab
only needs to be set during initial project build up.
Figure 3.1: Project Details Tab.
 Name, Description – descriptive information concerning the scope of the project.
 Country, State – it is highly recommended the Country field not be left blank. Option C
Basic checks this against the user settings on the computer it is being opened on to
adjust for currency.
3.1.2 Charts Tab
Charts in this tab will summarize information from all the sites assigned to a particular project,
i.e. it contains information from all the meters in all the areas assigned to all the sites associated
with the project. It provides a useful comparison of the resources assigned to each particular
utility. There are a total of 8 graphs available but only those relevant to the type of meters
assigned to your project will be shown. When a project consists of only one site, charts in this
21