Download Open Access
Transcript
Appendix 13 The MOP0-730 laser system Appendix 13 The MOP0-730 laser system Pump beam parameters Laser type Laser wavelength Spatial mode Pointing stability Beam divergence Linewidth Repetition rate Pulse width Pump energy by oscillator Master Oscillator Power Oscilator (min) (max) Pump energy in total Minimum Maximum Tuning Characteristic Signal tuning range (typical) Idler tuning range (typical) Other Output Characteristics Polarisation Beam diameter (typical) Beam shape (typical) Beam profile Beam divergence Pointing stability Pulse width (typical) Resettability Pulse to pulse stability Timing jitter Nd:YAG 355 nm, 3rct harmonic >70% Gaussian fit <50 J.lrads <0.5 mrads <0.001 cm- 1 at 355 nm 20Hz 5-6 ns n/a 200mJ 450mJ 200mJ 450mJ 440 to 690 nm 730 to 1800 nm Horizontal > 97% 5mm Round±20% >70% Gaussian fit <1 rnrad <200 J.Lrad 2 ns less than pump <1 x linewisth/°Cihr ±8% <2 ns Table 16 MPOP-730 Laser Specification [21} 61 Department of Atomic Physics, Lund Institute of Technology