Download GlobalVision Manual

3.
The POWER DOWN CONFIRMATION message box should appear. THIS IS THE ONLY
WARNING BEFORE THE SELECTED GROUP IS POWERED DOWN. Click on YES to power
down the group. See Figure 126.
Figure 126 - Power Down Confirmation message box
TO POWER ON A GROUP:
1.
Verify using the GROUP POWER ON / OFF indicators that the group is not receiving power.
2.
Click on the GROUP POWER button to power on the selected group. See Figure 124.
POWER ON/OFF SELECTED GROUP for DENSITY
The POWER ON/OFF SELECTED GROUP button is used to power on or off an individual group(s). The
POWER ON/OFF SELECTED GROUP button is a small black square button. It is located on the left side of
the FRONT PANEL tab, above the VKM CD LEDs. See Figure 127.
Figure 127 – POWER ON/OFF SELECTED GROUP button
DOC #0892
91