Download quick start english

INSTALLER PROGRAMMING MENUS
[1]
Quick Key
[1][1]
[1][1][1]
[1][1][1][1]
[1][1][1][2]
[1][1][2]
[1][1][2][1]
[1][1][2][2]
[1][1][3]
[1][1][4]
[1][1][5]
[1][1][6]
[1][1][6][1]
[1][1][6][2]
[1][1][7]
[1][1][7][1]
[1][1][7][2]
[1][1][8]
[1][1][9]
[1][1][9][1]
[1][1][9][2]
[1][2]
[1][2][ 01.. 34]
SYSTEM
Parameter
Default
System: Time Define
Exit Entry Delay 1
Entry Delay 1
30
Exit Delay 1
45
Exit Entry Delay 2
Entry Delay 2
45
Exit Delay 2
60
Bell Time Out
04
Bell Delay
00
Switched Auxiliary Break
10
Wireless Module Times
Jamming Time
None
Supervisory (S.V) Time
0
Zone Test Times
Start Test
HR:00;MIN:00
Zone Test Period
00
AC Off Delay
30
More Times
Phone Line Cut Delay
04
Guard Delay
30
System: System Control
Parameter
Default Parameter
01) Quick Arm
YES 13) Alarm Zone
Expander Cut
02) Quick UO
YES 14) Fire Temporal Alarm
03) Allow Bypass
YES 15) Grand Master Code
04) Quick Bypass
NO
16) Audible Jamming
05) False Code
NO
17) Technical Tamper
Trouble
06) Bell Squawk
YES 18) Technical Reset
07) Bell 30/10
NO
19) Abort Alarm
[1][3]
[1][3][1]
[1][3][2]
[1][4]
[1][4][1]
[1][4][2]
[1][4][3]
[1][5]
[1][5][0]
[1][5][ 1..8]
[1][6]
08) Alarm Phone Cut
NO
09) 3 Minutes Bypass
YES
10) Double Verification NO
Fire Alarm
11) Audible Panic
NO
NO
12) Buzzer➔Bell
System: Set Clock
System Date
System Time
System: Windowing
Window Start
Window Stop
Window Days
System: Labels
Global
Partition 1 — Partition 8
System: Tamper Sound
[1][7]
[1][8]
[1][8][1]
[1][8][2]
[1][9]
System: Default Enable
System: Service Information
Service Name
Service Phone
System: System Version
[2]
Quick Key
[2][1]
[2][2]
[2][3]
Range
0-255 sec
0-255 sec
0-255 sec
0-255 sec
01-90 min
00-90 min
01-90 sec
ZONES
Parameter
Options
Zones: One By One
Zones: Partitions
Zones: Zone Type
[2][3][ZZ] + [DISARM] +[00-22] 00) Not Used
01) Exit Entry 1
02) Exit Entry 2
03) Exit (Open)/Entry
04) Entry Follower
05) Instant
06) Interior + Exit Entry 1
07) Interior + Exit Entry 2
08) Interior + Exit (Open)/Entry
None, 10,20,30 sec
0-7 hours
[2][4]
Zones: Zone Sound
[2][4][ZZ] + [DISARM] +[1-6]
00-24 Hours, 00-59 Min
00-24 Hours
0-255 Min
[2][5]
Zones: Zone Termination
[2][5][ZZ] + [DISARM] +[1-4]
Zones: Loop Response
[2][6][ZZ] + [DISARM] +[1-12]
[2][6]
01-20 Min
01-99 Min
Default Parameter
NO 25) Engineer Tamper
NO
NO
NO
NO
NO
NO
20) Summer/Winter Clock
NO
21) Forced Keyswitch Arming YES
22) Pager
NO
23) Arm Pre Warning
24) Low Battery Arm
Default
NO
26) Blank Display
27) 24 Hour Bypass
28) IMQ Install
29) Grand Master
Authority/Partition
30) Double Code
31) Disarm Stop
Follow Me
32) Global Follower
33) Area
34) Disable Keypad when
Auto Disarm exist
YES
YES
JAN 01 2000 (SAT)
00:00
DD MM YYYY (DAY)
HH:MM
HR:00;MIN:00
HR:00;MIN:00
All
00-24 Hours, 00-59 Min
00-24 Hours, 00-59 Min
SUN(Y/N)-SAT(Y/N)
Rokonet
Partition 1 — Partition 8
Bell/Arm Buzzer/Disarm
12 Characters
12 Characters
1) Silent
3) Buzzer Only
5) Bell/Arm
NO
NO
NO
YES
NO
YES
YES
NO
NO
09) Interior + Entry Follower
10) Interior + Instant
11) Utility Output Trigger
12) Day Zone
13) 24 Hours
14) Fire
15) Panic
16) Special Emergency
17) Pulsed Keyswitch
2.The loop response times defined in locations 5 to 12 can be assigned only to zones 1
to 8 on the Main Panel or to zones located on the zone expander RP128EZ8F00A.
1) None
2) Ordered
3) Not Ordered
Zones: Cross Zones
[2][8]
[2][9]
[2][9][1]
[2][9][2]
[2][9][3]
[2][9][4]
[2][9][5]
[2][9][6]
[2][9][7]
[2][9][8]
[2][9][9]
[2][0]
[2][0][1]
[2][0][2]
Zones: Zone Labels
Zones: Maintenance
Copy to a Zone
Delete a Zone
Add/Copy Partition
Delete a Partition
Wireless Module Calibration
Wireless Zone Allocation
Wireless Communication Test
Zone Self Test
Soak Test
Zones: Miscellaneous
Forced Arming
Pulsed Count
[3][1]
Utility Output:
Follow System Event
01) Bell Follow
02) No Telephone Line
03) Communication Failure
04) Trouble Follow
05) Ground Pulse
06) Low Battery
07) Ac Loss Follow
08) Sensors Test
09) Voice Module
10) Battery Test
11) Bell Burglary
12) Scheduler
13) Digital Reader Communication
14) Switched Auxiliary
Utility Output:
Follow Partition Event
01) Ready Follow
02) Alarm follow
03) Arm Follow
04) Burglary Follow
05) Fire Follow
06) Panic Follow
07) Special Emergency Follow
08) Duress Follow
09) Buzzer Follow
10) Chime Follow
11) Exit/Entry Follow
12) Fire Trouble
13) Day zone Trouble
14) General Trouble
[3][2]
[3][3]
Utility Output: Follow Zone
[3][4]
[4]
Quick Key
[4][1]
CODE
Parameter
Code Maintenance:
Authority Level
[4][2]
Code Maintenance:
Partition
Code Maintenance:
Grand Master
Code Maintenance:
Installer
Code Maintenance:
Sub Installer
Code Maintenance:
Code Length
[4][4]
[4][5]
[4][6]
[5]
Quick Key
[5][1]
[5][1][1]
[5][1][2]
[5][1][3]
[5][1][4]
[5][2]
[5][3]
[5][3][1]
[5][3][2]
[5][3][3]
2) Bell Only
4) Bell +Buzzer
6) Buzzer/Disarm
16 Characters
16 Characters
page 9
Options
15) Stay Follow
16) Tamper Follow
17) Disarm Follow
18) Bell Follow
19) Bell Stay Off
20) Zone Bypass
01) Zone Follow
03) Arm Follow
02) Alarm Follow
04) Disarm Follow
Note: Each utility output can be activated by a group of up to five zones.
[5][4]
[5][4][1]
[5][4][2]
[5][4][3]
[5][5]
[5][5] [01..14]
[5][6]
[5][6][1]
[5][6][2]
[5][6][3]
[5][6][4]
Dialer: Access and ID
Access Code
ID Code
MS Lock
Dialer: Controls
Parameter
01 MS Enable
02 Follow Me Enable
03 Upload/Download Enable
04 Call Delay
05 Dial Tone Wait
06 Call Save
07 User Initiated Call
Dialer: Parameters
Monitoring Station Retries
Follow Me Retries
Ring to Upload/Download
Dial Tone Time
[5][6][5]
Redial Wait
30
[5][6][6]
Dialing Method
DTMF
[5][6][7]
Pulse Duty Cycle
61/39
[5][6][8]
[5][7]
[5][7][1]
Swinger Shutdown Limit
Dialer: Report Split
Monitoring Station Arm/Disarm
00
[5][7][2]
Monitoring Station Urgent
1s1 Backup 2nd
[5][7][3]
Monitoring Station Non Urgent
1s1 Backup 2nd
[5][7][4]
[5][7][4] [1..8][1]
[5][7][4] [1..8][2]
Follow Me
Phone Partition
Phone Event
Event
01) Intruder
02) Fire
03) Emergency
04) Panic
05) Tamper
06) Remote Programming
07) AC Off
08) Duress
09) Arm
5678
0001
000000
Default
YES
YES
YES
NO
YES
No
YES
Parameter
08 Call Back Upload/Download
09 Auto Batch
10 Answering Machine Override
11 UL Installation
12 Show Kiss Off
13 Show Handshake
14 Audible Kissoff
08
03
12
6
Options
Grand Master
Manager
User
Arm Only
Cleaner
Utility Output Activation
1s1 Backup 2nd
User Unbypass
Guard
1) 4 Digits
2) 6 Digits
DIALER
Parameter
Default
Dialer: Telephone Numbers
MS Phone 1
MS Phone 2
MS Phone 3
Remote Upload/Download Phone
Dialer: Customer Account Number
Dialer: Communication Format
Format for MS Phone 1
Format for MS Phone 2
Format for MS Phone 3
page 10
Range
32 characters
Default
YES
YES
YES
YES
NO
NO
NO
YES
NO
page 11
Default
YES
NO
YES
NO
NO
NO
NO
01-15
01-15
01-15
1) 6 seconds
2) 9 seconds
1) 30 sec
2) 60 sec
1) DTMF
2) Pulse @ 20 BPS
3) Pulse @ 10 BPS
1) 67/33
2) 61/39
00-15
Utility Output: Follow Code
[4][3]
Yes
ProSYS Security
System
UTILITY OUTPUT
Parameter
Utility Output: Follow Nothing
18) Exit Termination
19) Latched Keyswitch
20) Entry Follower + Stay
21) Keyswitch Delay
22) Latched Keyswitch
Delay
1) Silent
4) Bell + Buzzer
2) Bell Only
5) Door Chime
3) Buzzer Only
6) Bell/Arm Buzzer/Disarm
1) Normally Close
3) Double End Of Line
2) End Of Line
4) Normally Open
1) Normal (400 ms)
05) 0.5 Hour
09) 2.5 Hours
2) Slow( 1 sec)
06) 1 Hour
10) 3 Hours
3) Fast (10 ms)
07) 1.5 Hours
11) 3.5 Hours
4) Very Fast (1 ms)
08) 2 Hours
12) 4 Hours
Note:
1.The loop response 1 ms (option 4) is usually used for shutters or other devices that
require very quick responses. This loop response time can be defined only for zones
located on the zone expander RP128EZ8F00A.
[2][7]
[3]
Quick Key
[3][0]
1) Do not call
2) Call 1s1
3) Call 2nd
4) Call 3rd
5) Call All
6) 1s1 Backup 2nd
1) Do not call
2) Call 1s1
3) Call 2nd
4) Call 3rd
5) Call All
6) 1s1 Backup 2nd
1) Do not call
2) Call 1s1
3) Call 2nd
4) Call 3rd
5) Call All
6) 1s1 Backup 2nd
Event
10) Disarm
11) Bypass
12) Wireless lost
13) Wireless Low Battery
14) Bell Trouble
15) False Code
16) Low Battery
17) Wireless Jamming
18) BUS Trouble
Default
NO
NO
NO
NO
NO
NO
NO
NO
NO
page 12
)
[5][7][4][ 1-8][3]
[5][8]
[5][8][1..3]
Phone Restore Events
Event
01) Intruder
02) Tamper
03) AC Off
04) Wireless lost
05) Wireless Low Battery
Dialer: Alarm Restore
Alarm Restore
[5][9]
[5][9][1]
[5][9][2]
[5][0]
[5][0][1]
[5][0][2]
[5][0][3]
Dialer: Periodic test
Monitoring Station Test
Upload Download Test
Dialer: Auto Codes
Contact ID
SIA
Delete All
[6]
Quick Key
[6][1]
[6][1][1][1..4]
[6][1][2][1..4]
[6][2][1..9]
REPORT CODES
Parameter
Report Codes: Emergency Key
Emergency Key Alarm
Emergency Key Alarm Restore
Report Codes: Zones
Default
YES
NO
NO
NO
NO
On Bell Time out
[6][4]
[6][4][1][1..0]
[6][4][2][1..0]
[6][5]
[6][5][1][1..4]
[6][5][2][1..4]
[6][6]
[6][6][1..7]
Report Codes: Accessory Tamper
Report Codes: Main Trouble
Main Trouble
Main Trouble Restore
Report Codes: Power
Supply Module Trouble
Trouble Condition
Trouble Condition Restore
Report Codes: Arm Codes
Arm Codes
Default
NO
NO
NO
NO
1) On Bell Time put
2) Follow Zone
3) At Disarm
[6][8]
[6][8][1..0]
[6][9]
[6][0]
[6][0][1..4]
[7]
Quick Key
[7][1]
[7][1][1..9]
Report Codes: Disarm Codes
Disarm Codes
Report Codes: Miscellaneous
Miscellaneous
Report Codes:
Special communication
Report Codes: Accessory Code
Accessory Code
1)
2)
1)
2)
1)
2)
3)
3)
4)
3)
4)
5)
6)
7)
8)
9)
1)
2)
3)
4)
Auxiliary Emergency
Panic
Auxiliary Emergency
Panic
Alarm
Alarm Restore
Day zone Trouble/ Wireless
Zone Supervision
Day zone Trouble/ Wireless
Zone Supervision Restore
Keypad
Utility Output
Power Supply
Event Logger
[7][2]
[7][3]
[7][4]
[7][5]
Accessories: Verify Module
Accessories: Bus Test
Accessories: Bus Scan
Accessories: Auto Settings
[8]
[8][1]
5) Wireless Button Accessory
6) Wireless Zone Module
7) Advanced Voice Module
[8][2]
MISCELLANEOUS
Miscellaneous:
Wireless Button Parameters
Miscellaneous:
Wireless Button Allocation
1)
2)
3)
4)
5)
1)
2)
3)
4)
5)
Low Battery
Bell
Phone
AC Loss
Aux Fail
Low Battery
Bell
Phone
AC Loss
Aux Fail
6)
7)
8)
9)
0)
6)
7)
8)
9)
0)
[9]
Quick Key
[9][1]
[9][1][1]
[9][1][2]
[9][1][2][1]
[9][1][2][2]
[9][1][2][3]
[9][1][3]
[9][1][4]
[9][1][4][1]
[9][1][4][2]
[9][1][5]
[9][2]
[9][3]
[9][3][1]
Clock Not Set
BUS Fail
False Code
Bell Tamper
Box Tamper
Clock Not Set
BUS Fail
False Code
Bell Tamper
Box Tamper
1)
2)
1)
2)
Low Battery
Bell
Low Battery
Bell
3)
4)
3)
4)
1)
2)
3)
4)
User Arm
Keyswitch Arm
Auto Armed
Remote Arm
5) Quick Arm
6) Force Arm
7) Wireless Button Arm
page 13
AC Loss
AUX Fail
AC Loss
AUX Fail
[0]
ACCESS CONTROL
Parameter
Door Define
Partitions
Door Time Setting
Open Delay
Door Force Delay
Door Alarm Delay
Door Fire Settings
Door Input Settings
Door contact
Request to Exit Button
Door Label
Card Code Position
Special Code
Arm Code
Quick Arm Code
4) Remote Disarm
5) Wireless Button Disarm
1)
2)
3)
4)
5)
6) System Reset
7) Abort Alarm
8) Self Test O.K
9) Self Test Failure
10) Cancel Report
Enter Programming
Exit Programming
Periodic MS Test
Periodic UD Test
Call Back Request
3) Wireless Button Battery
4) Printer Module
Wiring information:
Use the following tables for selecting the correct wire thickness to minimize the power loss and ensure reliable system
operation. Take into account the installations current requirements and the wiring distances involved
Wire Gauge
24 AWG
22 AWG
20 AWG
19 AWG
Options
1) Keypad
2) Zone Expander
3) Utility Output
4) Power Supply
5) Event Log
6) Wireless Button
7) Printer Module
8) Access Control
91) Digital Key Reader
92) Advanced Digital Voice Module
(0.5 mm / 0.02inch)
(0.64mm / 0.025inch)
(0.8 mm / 0.031inch)
(0.9 mm / 0.035inch)
Max Combined Length (BUS) from Panel to Expansion module
150 meters
492 feet
200 meters
656 feet
333 meters
1092 feet
400 meters
1312 feet
Desired Wire Gauge for Detectors Wiring Distances
Max
Current
(mA)
ACCESSORIES
Parameter
Accessories: Add/Delete Module
Add/Delete Module
Fire
Duress
Fire
Duress
Bypass
Zone Tamper
Zone Tamper Restore
Low Battery
Low Battery Restore
1) User Disarm
2) Keyswitch Disarm
3) Auto Disarm
1) Wireless Zone Expander
2) Wireless Button Module
Options
4)
[6][3][1..7]
Event
06) Bell Trouble
07) Low Battery
08) Wireless Jamming
09) BUS Trouble
[6][7]
[6][7][1..5]
20mA
30mA
40mA
50mA
60mA
70mA
80mA
90mA
100mA
18 AWG
(1.00mm / 0.04inch)
19 AWG
(0.9 mm / 0.035inch)
Max Run
Meters
Feet
1195
3920
793
2600
597
1960
478
1568
296
1300
341
1120
299
980
264
867
239
784
Max Run
Meters
Feet
945
3100
628
2060
472
1550
378
1240
314
1030
270
886
237
775
209
687
189
620
20 AWG
22 AWG
(0.8 mm / 0.031inch) (0.64 mm/ 0.025inch)
Max Run
Meters
Feet
750
2460
500
1640
375
1230
300
984
250
820
214
703
187
615
166
547
123
492
Max Run
Meters
Feet
472
1550
314
1030
236
775
189
620
157
515
135
443
118
388
105
343
94
310
24 AWG
(0.5 mm / 0.02inch)
Max Run
Meters
Feet
296
970
197
646
148
485
118
388
98
323
84
277
74
243
66
215
59
194
Main Panel Technical Data:
Default
Range
4
NO
10
Open
1-99 sec
YES/NO
1-99 sec
Open/Close
N.O
N.O
N.O/N.C
N.O/N.C
00
00-37
99
98
00-99
00-99
Input Power
Current Consumption
Rechargeable Standby Battery
Power Outputs:
Auxiliary Power
Bell/LS (External) Sounder Output
16.5 Volts AC @ 40 Volt-Amps (VA) (via integral transformer)
60 mA, typical / 70 mA, maximum
12 Volts up to 17 Amp-Hours (AH), typical
Programmable Voltage (Utility) Output
UO1: Relay (programmable output) (3 Amps)
UO2: 500 mA transistor
UO3-UO6: Open Collector, 70 mA, maximum
375 mm x 330 mm x 98 mm
200 mm x 115 mm x 65 mm
F3
3.0 A
Battery Power
AUX
Automatic fuse
BELL
Automatic fuse
Cabinet Dimensions
Main Board Dimensions
Fuses
12 Volts DC @ 600 mA, maximum (from all AUX terminals)
12 Volts DC @ 900 mA, maximum
Technical Data of Expansion Modules:
Module
8 LED Keypad
16 LED Keypad
LCD Keypad
Proximity LCD
Keypad
8 zone expansion
module
16 zone expansion
module
8,16 wireless zone
expansion module
4 relay output
expansion module
8 transistor output
expansion module
Power Supply
Expansion Module
Current Consumption
32 mA, typical /
72 mA maximum
32 mA, typical /
72 mA maximum
75 mA maximum
100 mA maximum
25 mA, typical /
30 mA, maximum
27 mA, typical /
34 mA, maximum
12 mA, typical /
15 mA, maximum
25 mA, typical /
140 mA, maximum
25 mA, typical /
30 mA, maximum
Additional Information
Frequency: 868.6-868.7 MHz (narrowband operation in EU)
Receiving Range: 200 m (Key fob) - 400 m (detectors)
Contacts: 4 Form C (SPDT) Relays.
Contact rating: 3 A / 24V DC
Contacts: Open Collector, Active Pull-Down, 70 mA maximum
Input Power:
Rechargeable
Standby Battery:
Power Outputs:
Fuses:
Event Log
Expansion Module
Printer Module
X-10 Transmitter
Module
Access Control
Module
Voice Module
Electronic Key
Reader
Advance Digital
Voice Module
Voice Message Unit
25 mA, typical / X
30 mA, maximum
7 mA, typical /
10 mA, maximum
25 mA, typical /
29 mA, maximum
100 mA maximum
Input power
Readers
Consumption
Relay
6 mA, typical/
26 mA maximum
11 mA, typical /
17 mA maximum
38 mA, typical /
Audio Signal
57 mA maximum
9 mA (standby) /
Audio Signal
60 mA (active speaking normal volume) /
130 mA (active speaking full volume)
12 Volts up to 17 Amp-Hours (AH), typical
Auxiliary power: 12 Volts DC @ 600 mA, maximum
Bell/LS (External) Sounder Output: 12 Volts DC @
900 mA, maximum
F1: Battery power 3.0 A
F2: Auxiliary power 2.0 A
F3: Bell/loudspeaker power 1.0 A
13.8V DC + 10%
5V / 150 mA maximum
24V DC / 1 A maximum
Max = 5V pp / Max = 2V
V in max = 2.5V pp / V out max = 4V pp
RTTE COMPLIANCE STATEMENT
Hereby, Rokonet Electronics Ltd, declares that this control panel (RP128MC0000A, RP140MC0000A, RP116MC0000A),
with wired accessories (including cables) and wireless accessories, is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
EXIT PROGRAMMING
page 14
16.5 Volts AC @ 40 VA (via transformer)
page 15
page 16