Download A12E-G2121 Front

Transcript
Chapter 5: Subsystem Maintenance and Upgrading
mounted in a rackmount rack, use another hand to support its
weight while removing the module. (See Figure 5-7)
Figure 5-7: Removing the PSU Module
WARNING!
1. When a PSU is removed form the chassis, the cooling module is also
removed from the chassis.
2. It is recommended that the replacement procedure is completed in less
than five (5) minutes to prevent the subsystem from overheating.
Step 5.
Install the replacement module. Make sure the extraction
handle is held at its up-most position so that the saddle
notches on the sides of the handle can snap onto the metal
anchor pins on the interior walls of the PSU slot. Push the PSU
into chassis, and when you feel the contact resistance, push
the handle downward to secure the module.
Figure 5-8: Securing PSU Using the Extraction Handle
Step 6.
Secure the PSU to the system by fastening the retention
screw through the PSU extraction handle.
Replacing a Faulty PSU
5-13