Download 2403 User Manual
Transcript
Configuration Switch Descriptions SW 4 SW 2 ON 1 2 3 4 5 6 7 8 9 10 P o rt 2 L L T PU PD O FF ON 1 2 3 4 5 6 7 8 9 10 O FF P o rt 4 L L T PU PD P o rt 3 L L T PU PD P o rt 1 L L T PU PD Figure 1: Switches SW2 and SW4 L 485 option, OFF for 422. OFF: No effect ON : Connects TX+ to RX+ for two-wire operation L 485 option, OFF for 422. OFF: No effect ON : Connects TX- to RX- for two-wire operation PU 485 option, OFF for 422. OFF: No effect ON : Adds a 1 K ohm pull-up resistor to RX+ PD 485 option, OFF for 422. OFF: No effect ON : Adds a 1 K ohm pull-down resistor to RX- T 422 and 485 option. OFF: No effect ON : Adds a 120 ohm termination resistor between RX+ and RX- Sealevel Systems SeaPORT+4 Page 6