Download Manual

Chapter 2
RTC Battery
2
1
Power Switch
RTC
Battery
2
1
Power
Switch
Power_Enable
GND
+3.3V
GND
Power Switch
The power switch is used to power on or power off the system.
Battery
Connect to the battery connector
The RTC Battery powers the real-time clock and CMOS memory. It is an auxiliary source of
power when the main power is shut off.
Safety Measures
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the manufacturer.
• Dispose of used batteries according to local ordinance.
21
Chapter 2 Hardware Installation
www.dfi.com