Download Imagestore IS2

Preface
Easysound Stand-alone User Manual
Important Safety Notices
Injury Precautions
USO RESTRITO
1. Use a proper power cable.
To avoid fire hazard, use only an appropriate power cable, which
complies with the following:
For mains connection use only a 10amp IEC inlet lead
meeting EN60320 or equivalent.
Connection to the mains supply should be via a circuit
breaker or by a mains plug which meets the relevant local standards in
the country of installation.
2. Avoid electrical overload.
To avoid electric shock or fire hazard, do not apply a voltage to a
terminal that is outside the range specified for that terminal.
3. Ground the product.
Easysound Standalone is grounded through the grounding conductor of
the power cable. To avoid electrical shock, the grounding conductor
must be connected to earth ground. Before making connections to the
input or output terminals of Easysound Standalone, ensure that the
product is properly grounded.
4. Do not operate without the covers.
To avoid electrical shock or fire hazard, do not operate Easysound
Standalone with its covers removed.
5. Use an appropriate fuse.
To avoid fire hazard, use only the fuse type and rating specified for
Easysound Standalone.
6. Do not operate in wet/damp conditions.
To avoid electrical shock, do not operate Easysound Standalone in wet
or damp conditions.
Page 4
Miranda Technologies Ltd