Download Map3D User`s Manual

256
Map3D User's Manual
CAD > Build > Redo Point
Upon completion of block construction the user is prompted to enter the properties. This allows you
to specify the colour of the construction line.
Colour - specifies the colour number that will be used to display the construction line.
A total of 10 colours are available for display. These are numbered respectively
1 through 10,
11 through 20,
21 through 30, etc.,
such that the same colour is displayed for numbers
1, 11, 21...,
2, 22, 32...,
3, 23, 33..., etc.
Undo - unselects the last point entered and returns to the construction line grid building routine.
CAD > Build > Undo Point
Build - completes grid construction and enters the block into the model database.
Once you have completed this operation you have one last chance to undo this and remove this
grid from the model database by selecting
CAD > Build > Undo Build
Cancel - aborts line construction.
Notes
Different colour numbers should be used to represent logical groupings of construction lines (e.g.
for different levels, sections or logical mining units such as development, stoping etc.). These
colours are user definable
Tools > Custom Colours
Since it is easy to toggle on and off the display of specific construction line colour numbers
View > Hide Block Colours
This provides an efficient method to work with complex construction line data.
For examples on the use of construction lines in model building refer to:
Model Building Tutorials
Pressing the space-bar automatically activates the last build function that was used.
4.5.1.7
Build
Completes construction of the following entities by filling in default values for all remaining points:
CAD > Build > Block
CAD > Build > FF Loop
Map3D International Ltd 1990-2015