1
Download AS-i 3.0 Command Interface
Transcript
AS-i 3.0 Command Interface Commands of the Command Interface AAe Auto_Address_Enable This flag indicates whether the automatic address programming is enabled (bit = 1) or disabled (bit = 0) by the user. OL Offline This flag is set when the mode should be changed to OFFLINE or when this mode has already been reached. DX Data_Exchange_Active If the "Data_Exchange_Active" flag is set, the data exchange between AS-i master and slaves is available in the data exchange phase. If this bit is not set the data exchange is not available. The read ID telegrams are transmitted to the slave. The bit is set if the AS-i master enters the offline phase. 4.4.4 Get Delta List (GET_DELTA) The delta list contains the list of slave addresses with configuration errors. Request byte 27 26 T 0 25 24 1 2 23 22 21 20 5716 circuit Tab. 4-75. Response (if O ≡ 0) byte 27 26 25 24 1 2 T 3 7A 22 21 20 3A 2A 1A – 27B 26B 25B result 6A 5A 4A … 10 23 5716 … 31B 30B 29B 28B 24B Tab. 4-76. Response (if O ≡ 1) byte 27 26 25 24 1 22 21 20 4A 5A 6A 7A 28B 29B 30B 5716 2 T 3 0 result 1A 2A 3A … 10 23 … 24B 25B 26B 27B 31B Issue date: 7.6.2013 Tab. 4-77. 50
