Download Technical Solutions Handbook

Transcript
t e c h n i c a l
s o l u t i o n s
Glossary
Dancer Roll—Dancing Idler
A weighted roller that rides between the unwind and
metering unit. The roller is used to take up slack and
maintain a uniform web tension.
Dandy Roll
Wire-cylinder on papermaking machines that patterns or
watermarks the web.
Decollator
Mechanical device used to separate parts of continuous
forms while removing waste materials such as carbons.
Desensitize
To restrict the ability of NCR PAPER brand to produce
a print.
Desensitizing Ink
Transparent ink applied to CF coating to prevent
print development.
Diecut
Removal of form sections by use of cutting rule
or special die.
Driers
Compounds added to ink to accelerate drying.
Drilling
The use of hollow rotating paper drill bits to make holes
in a lift or stack of paper.
Driography
An offset printing process using special planographic
plates and inks that do not require dampening to
differentiate between image and non-image areas.
Dry Offset
A printing process using a relief plate and blanket
but no water.
Ductor Roller
Ink or water roller that alternately contacts the fountain
and distributing rollers.
Duplex
Paper having different colors and/or finishes on
opposing sides.
Dimensional Stability
The property of a paper to resist changes in size caused by
stresses occurring during processing and/or changes in
temperature and relative humidity.
Dusting
Debris, coating pick, slitter dust, fibers, and/or starch is
deposited onto the blanket from the paper during the
printing process. In severe cases dusting can affect the
quality of the printed image.
Discoloration
A change in the color of the paper.
Dwell Time
The period when two objects are in contact.
Distributing Rollers
Rollers that break down and distribute ink to
the form rollers.
Edge Gumming
The process of gluing multiple parts along the edge of the
sheets to create a finished form.
Double-Double Bevel
A slitter wheel with both sides angled in from the center
having sharper angles at the cutting edge, to give better
resistance to dulling.
Edge Padding
A process of gluing collated form sets or similar sheets
along one edge to hold them in order for further
processing or use. (See Fanapart)
Draw
Movement of paper under clamp when guillotine cut,
causing a difference in length between top and
bottom of lift.
Emulsification
A condition when the offset ink and fountain
solution mix.
61.