Download Contractor handbook

access route to the scaffolding, there must be a green sign that states technical details about
the scaffolding.
For all work carried out at a height, a written risk analysis (TSF form) is required. Tools and
loose objects must be secured with a strap. Hand tools can be secured with a hand strap. A
safety net can also be installed in the work area underneath the scaffolding.
When working on a roof, construction and disassembly of scaffolding, or in which there is a
danger of falling, fall safety equipment must be used. Fall safety equipment must be used in
accordance with the user instructions and use requires documented training. If fall safety
equipment is required, there must always be one person present in the immediate area (in
addition to the person using the fall safety equipment) that is able to initiate a rescue or notify
others in the event of a fall. This person must sign in the appropriate place on the TSF form.
Glencore Nikkelverk has also developed a procedure for working at height. It can be
obtained on request to the contact person
3.3.11 Responsibility
The executing tradesman has the responsibility for ensuring that the TSF form is completed
and stored at the workplace, as long as the work is ongoing. When the work is completed,
the form must be stored at the workshop/office where the tradesman has his/her base. The
form must be stored for two months.
If the work requires a white work permit, the tradesman has the responsibility for contacting
an issuer, who must write the work permit along with the executing tradesman. When the
work is completed, the executing tradesman must return the work permit to the issuer, who
will send a copy to the Safety Officer.
21