1
Download Tektronix scope programmer`s manual
Transcript
TIMe Description: Sets or queries the time that the oscilloscope can display. Group: Miscellaneous Related Commands: DATE, DISplay:CLOCk Syntax 1: TIMe <QString> Syntax 2: TIMe? Argument: <QString> is a date in the form "hh:mm:ss". hh refers to the hour number from 1 to 24. mm refers to the minute number in the hour from 0 to 59. ss refers to the seconds number in the minute from 0 to 59. There must be a colon after the hh and after the mm. Example: TIME "01:24:00" specifies that the time is set to 01:24 AM. 415
