1
Download Lookout Reference Manual
Transcript
Chapter 18 Object Class Reference Table 18-106. Parameter Group 20 (Input Selection Parameters) (Continued) Data Member Type Read Write Description XU numeric yes yes Decimal point position selection XH logical yes yes Square root extraction Table 18-107. Parameter Group 21 (Setting Parameters) Data Member Type Read Write Description SH numeric yes yes High limit of setting range SL numeric yes yes Low limit of setting range XR numeric yes yes Remote setting input type XL logical yes yes SV tracking selection Table 18-108. Parameter Group 22 (Output Action Parameters) Data Member Type Read Write Description T0 numeric yes yes Control output cycle setting T1 numeric yes yes Cooling-side output cycle setting XE logical yes yes Direct/reverse action XN numeric yes yes Action after power recovery setting SX numeric yes yes Start determination point Table 18-109. Parameter Group 23 (Alarm 2 Parameters) Data Member Type Read Write Description XA numeric yes yes First alarm action NA logical yes yes First alarm energized/de-energized OA numeric yes yes First alarm action when measured value exceeds abnormality WA numeric yes yes First alarm hold action XB numeric yes yes Second alarm action © National Instruments Corporation 18-321 Lookout Reference Manual
![Jahresbericht 2007 des Fraunhofer IFF [ PDF 3.03 MB ]](http://vs1.manualzilla.com/store/data/006798304_1-2ffbea970edf0c57999fe80b3092fe9a-150x150.png)
