Download WindMonitor User Manual

ReadConfig – reads current settings from nonvolatile memery
example
ReadConfig
Help – displays short help screen
example
Help
setup commands
a 1..20, Log, miN, maX, Stddev, Gain, Unipolar, Polynom, Ratio, Alias
d 1..12, Log, miN, maX, Stddev, Polynom, Alias
p 1..16, 0..3=
Vref [mV]
date 1.2.2007
time 11:45:20
MeasInterval [sec]
MeasDelay [sec]
LogInterval [sec]
RepInterval [sec]
ModemInterval [hr]
ModemDelay [min]
ModemOnTime [09:00:00]
ModemOnDuration [min]
ModemPIN
ModemNumber
EmailFrom
EmailTo
UserName
Password
TimeServer
TimeZone
SaveConfig - save configuration to Flash
ReadConfig - read configuration from Flash
? - shows actual settings
Modem? - shows actual modem settings
Config? - shows actual configuration
Serial1 300, 1200, 2400, 9600, 19200, 38400, 57600, 115200bps
Serial2 300, 1200, 2400, 9600, 19200, 38400, 57600, 115200bps
LogVariables - show all logged variables with names
DataFormat 0..7
ModemGPRS 0..1
WDtype 1..3
WDpwr12, WDpwr25
ReadData 10 – read last 10 records
TestGprs
TestGsm
Upgrade - upgrade firmware
Service - enter service mode
Exit - exit from service mode
Reset - reboot datalogger
26 of 46