Download Chapter 1 - Smart Power Systems

RPM Main Menu
4.2.1 Information
This tab displays the System Information and RPM Status. The information and values are
either provided by RPM or values set by the users in the “Configuration” section. Click on
“System Status” to view the information.
1. System Status
This section shows you the System Information and Network Status such as the
Firmware Version, the system name, uptime, IP Address, Gateway, PPP Server, Login IP
and the like. These values are either provided by RPM (i.e. MAC address) or set by user.
2. RPM Status
This section gives you remote control over the RPM unit and its individual devices. Click
on the individual power input icon to either switch on / off the device.
Page 13 of 32