Download as PDF - Hydrology Studio
Transcript
18 3 Hydrology Studio Quick Start Tutorials The tutorials in this section provide a quick introduction to using Hydrology Studio. They are intentionally kept brief so that you can actually start using the program as quickly as possible. The objective is not to teach you every single detail but to familiarize you with the basic principles and the way the program works. Online Learning Videos and More As they say, "a picture is worth a thousand words". A library of videos demonstrating the use of Hydrology Studio is being developed on the website at hydrologystudio.com/tutorials/. See these lessons in action! Hydrology Studio can generate a maximum of 100 hydrographs at once. What’s more, each hydrograph contains up to 8 return periods for a grand total of 800. Each hydrograph is identified by a number between 1 and 100. Hydrograph numbers need to increase as you work downstream. The program maintains this numbering system for you and does so in order to properly construct the routing diagram. Most watershed modeling functions are selected from the Ribbon Toolbar which contains two tabs labeled, Home and Edit. On the Home tab there are three unique sub-tabs for which you can display and process your work. Basin Model - The area where you visually construct your watershed schematic. Table - A numerical version of the Basin Model with key computed results added. Charts - A graphical and numerical combination of the first two tabs. Basic Procedure You add hydrographs to your model by simply clicking one of the buttons in either the Runoff Hydrographs group or in the Process Hydrographs group on the Ribbon Toolbar. Your model should always start at its upstream end and work downstream. You must first add a Runoff Hydrograph before choosing any from the Process Hydrographs group. Icons representing each hydrograph are automatically inserted on the Basin Model canvas. You are free to drag these icons around to better match the actual site configuration. Selecting a hydrograph with your mouse pointer (clicking an icon on the canvas, for © 2014 Hydrology Studio