Download Technical Documentation: Human Vibration Analyzer

44
Human Vibration Analyzer Type 4447 – User Manual
Note: All the measured RMS, MTVV, Peak and VDV values for the different axes are displayed
and stored without multiplication by the k-factors. In VTV, A(8), A(4), A(1) and VDV(8)k, the
different axes are multiplied with their respective k-factors.
3.10.2
Erase Data from Memory
To erase measurements and logging data from memory:
1) From the Main menu, select File manager then Erase all.
Note: Type 4447 does not support the deletion of individual files, so this action will
remove all stored measurements and logging data at once.
2) If you are sure that you want all files to be removed confirm this by pressing
3.11
.
Hardware, Firmware Information and Upgrade
To display information about the instrument's serial number, hardware and firmware, from
the Main menu, select Setup then About... to view the following information:
•
Hardware version – HW
•
Firmware version – FW
•
Serial number – Serial no.
Upgrading the firmware is done using the PC software, Vibration Explorer, which accompanies
Type 4447. For more information refer to Chapter 5.