Download Installing the WRIA
Transcript
287 6103 Extrapolate to All 300 Nodes 6104 6105 6106 6107 6108 Extrapolation of the IFRs If the user chooses the first option (“All 300 nodes”) then the extrapolated IFRs will be saved into separate comma delimited files for each node in the “ExtrapolatedIFR_output” directory in the same directory where the executable program is located. If such folder already exists the user will be asked to replace it or to enter a new folder name. 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 Extrapolation of the WUA curves The user will be given an option to save extrapolated WUA values in the individual comma delimited files or in the “tblWUA_MethodB” table of the Habitat database (Figure 7). The detailed description of the table and the database is given in the “Technical Documentation: The Habitat Time Series Model”. HabitatTimeSeriesInput.mdb database is provided with the program. 6125 6126 6127 6128 Extrapolate to a Single Node If the user chooses to extrapolate to a single node, the next window will request the user to either enter the node number or will offer to show a map (Figure 8). 6129 6130 6131 6132 If the user chooses the first option (.csv files) the extrapolated WUA will be saved into separate comma delimited files for each node in the “ExtrapolatedWUA_output” directory in the same folder where the executable program is located. If such folder already exists the user will be asked to replace it or to enter a new folder name. If the user chooses to save the output in the Habitat database, the user will be prompted to open the database. It should be noted that even though both extrapolated WUA in sq.feet/1000ft and percent of maximum habitat are written into the database, only percent of maximum habitat values that show the shape of the WUA curves have been proven to provide meaningful results. Figure 7. Output choice. Appendix C: Extrapolation Program User Manual