Download User Manual - Security Camera Shop
Transcript
User Manual V2.1 ─ DVR ─ Notice: This content is subject to be change without notice. User Manual 1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence of unprotected “Dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Notice: Ghosting or fractured images may occur on the screen when there is a suddenly surge or lightning stroke which cause damage on IC in the DVRs. User Manual 2 Table of Contents Chapter 1 LIVE OPERATIONS .............................................................................................. 5 Chapter 2 MAIN MENU SETUP ............................................................................................ 9 2-1 Auto Sequential ............................................................................................................ 13 2-2 Backup ......................................................................................................................... 14 2-2.1 Selection............................................................................................................ 14 2-2.2 Select Backup Device...................................................................................... 15 2-3 Configure ...................................................................................................................... 16 2-4 Time Search ................................................................................................................. 17 2-5 System Logs................................................................................................................. 21 2-5.1 Search Criteria ................................................................................................. 22 2-6 PTZ Operation .............................................................................................................. 23 2-7 Zoom ............................................................................................................................ 25 2-8 Shortcut toolbar ............................................................................................................ 26 Chapter 3 CONFIGURATION MENU ................................................................................... 29 3-1 Record Setup ............................................................................................................... 29 3-1.1 Continuous Record ........................................................................................... 30 3-1.1.1 Video Settings ____________________________________________________ 31 3-1.1.2 Event Recording ___________________________________________________ 32 3-1.2 Schedule Recording ......................................................................................... 33 3-1.2.1 Configuration______________________________________________________ 33 3-1.2.2 Holiday Configuration ______________________________________________ 34 3-2 Event Setup .................................................................................................................. 35 3-2.1 Video Loss ........................................................................................................ 35 3-2.1.1 Configuration______________________________________________________ 35 3-2.1.2 Event Handling ____________________________________________________ 35 3-2.1.3 Receiver Setup ____________________________________________________ 36 3-2.2 Motion Detection .............................................................................................. 36 3-2.2.1 Configuration______________________________________________________ 36 3-2.2.1.1 Motion Area Setup _______________________________________________ 37 3-2.2.2 Event Handling ____________________________________________________ 38 3-2.2.3 Receiver Setup ____________________________________________________ 38 3-2.3 Sensor ............................................................................................................... 38 3-2.3.1 Configuration______________________________________________________ 38 3-2.3.2 Event Handling ____________________________________________________ 38 3-2.3.3 Receiver Setup ____________________________________________________ 38 3-2.4 System .............................................................................................................. 39 3-2.4.1 Receiver Setup ____________________________________________________ 39 3-3 Camera Setup .............................................................................................................. 40 3-3.1 PTZ Setup ........................................................................................................ 41 3-4 Account Setup .............................................................................................................. 42 3-4.1 Administrator ..................................................................................................... 42 3-4.2 Other Users ...................................................................................................... 43 3-4.2.1 Permission ________________________________________________________ 43 3-5 Network Setup .............................................................................................................. 44 3-5.1 Networking Setup ............................................................................................. 45 3-5.1.1 DHCP Setup ______________________________________________________ 45 3-5.1.2 Static IP Setup ____________________________________________________ 45 3-5.1.3 PPPoE Setup ______________________________________________________ 46 3-5.1.4 3G Setup _________________________________________________________ 46 3-5.1.5 Bandwidth Limited _________________________________________________ 47 3-5.2 HTTP Setup ...................................................................................................... 48 3-5.3 DDNS Setup ..................................................................................................... 48 3-5.4 NTP Setup ........................................................................................................ 49 3-5.5 Mail Setup ........................................................................................................ 50 User Manual 3 3-5.6 FTP Setup ........................................................................................................... 51 3-6 Storage Setup .............................................................................................................. 52 3-6.1 HDD Setup ....................................................................................................... 52 3-6.2 USB Flash Derive Setup ................................................................................. 53 3-6.3 DVD-RW Setup ................................................................................................ 53 3-7 System Setup ............................................................................................................... 54 3-7.1 Auto Lock ......................................................................................................... 55 3-7.2 Auto Reboot ..................................................................................................... 55 3-7.3 Date/Time Setup............................................................................................... 56 3-7.3.1 Time zone ________________________________________________________ 56 3-7.3.2 Daylight Saving Time Setup ....................................................................................... 56 3-7.3.3 Change Date and Time _____________________________________________ 57 3-7.4 Monitor Setup ................................................................................................... 58 3-7.5 Input Setup ....................................................................................................... 60 3-7.5.1 Remote Control Setup ______________________________________________ 60 3-7.5.2 Panel Setup _______________________________________________________ 61 3-7.5.3 Mouse Setup ______________________________________________________ 61 3-7.5.5 Touch Screen Setup ________________________________________________ 62 3-7.6 Utility Setup ...................................................................................................... 63 3-7.6.1 Export Configuration _______________________________________________ 64 3-7.6.2 Import Configuration _______________________________________________ 65 3-7.6.3 Reset Configuration ________________________________________________ 66 3-7.6.4 Export Logs ______________________________________________________ 66 3-7.6.5 Clear Logs _______________________________________________________ 67 3-7.6.6 Upgrade Firmware _________________________________________________ 68 3-8 System Information ...................................................................................................... 69 3-8.1 DVR Information ............................................................................................... 69 3-8.2 Network Information ......................................................................................... 69 3-8.3 HDD Information ............................................................................................... 69 3-8.4 S.M.A.R.T Information ...................................................................................... 70 REMOTE SOFTWARE INSTALLATION and SETUP ............................................................ 71 3-9 Application Software Connection ................................................................................. 71 3-10 IE Connection ............................................................................................................. 73 3-11 AP Software and IE Connection Operation ................................................................ 75 User Manual 4 Note: The number of channels, sensors, relays, and split screen, and the resolution in the following figures are for reference. The actual screen output may be different by different models. Chapter 1 LIVE OPERATIONS In the live mode, you may monitor all channels of the DVR, listen to live audio from cameras, and configure the DVR. The DVR can support 4:3 and 16:9 aspect ratios of the screen layout. There is a shortcut toolbar on the top of the screen for users to logout, to access system information, to change screen aspect ratio, to make the DVR window full-screen, and to configure network stream quality. In the 16:9 mode, there are two major panes, the configuration menu and channel pane for video of channels. In the 4:3 mode, a user may access the configuration pane by right-clicking the mouse on the screen splits and a channel status pane will appear when the mouse cursor moves to the bottom of the screen RHD Series: Shortcut Toobar Channel Panel Configuration Panel 16:9 display - Operation screen Shortcut Toobar Channel Status Panel 4:3 display - Operation screen User Manual 5 HHD Series: Shortcut toolbar Configuration Panel 16:9 display - Operation screen Shortcut toolbar Channel Status Panel 4:3 display - Operation screen User Manual 6 960H Series: Shortcut toolbar Configuration Panel 16:9 display - Operation screen Shortcut toolbar Channel Status Panel 4:3 display - Operation screen User Manual 7 Table 1-1 Icon description in live mode Icon Description Recording of a channel is activated. Live audio of a channel is activated. Live audio of a channel is not activated. Video signal of a channel is available. Event recording of a channel is active in this channel. Motion detection of a channel is triggered. Alarm is triggered of a channel. The number of available alarms depends on models. Alarm is not triggered of a channel. The channel video-loss alarm of a channel has been triggered. USB device has been detected. DVD device has been detected. Network connection is available Network connection is not available Displays the current user Displays the current disk space and usage. (The figure shows 99% of the disk space has been used, and 1% is available.). The current disk temperature is also shown. Each channel shows the time stamp for local playback, remote live, remote playback, and backup-video. User Manual 8 Chapter 2 MAIN MENU SETUP To enter the main menu and set up a DVR, log-in account and user password are required. The default password of the administrator is “123456”. Please check the “Account Setup” for management of other log-in users. Table 2-1 Definition of keys of virtual keyboard Icon Description / Switch between capital letters and lower-case letters. / Switch between numbers and letters Delete the last character。 Enter to verify the password. The DVR shows the setup menu, if the password is accepted. Space key Table 2-2 Available keys on the remote control in the main menu mode Item Description Switch to previous or next options of an item Switch to different items MENU Save setup and back to the LIVE mode ESC Back to upper level of menu without saving ENTER Enter the menu, or display virtual keyboard User Manual 9 There are icons within the configuration pane on the live mode to operate different features of the DVR. The configuration pane is always on the left or right side of the screen in the 16:9 mode and can to be evoked by right-click in the 4:3 mode. 16:9 display, the main menu is on the right side of the screen 4:3 display, right-click on the screen to evoke the main menu.1 1 Icons may be slightly different by different models User Manual 10 Table 2- 3 Description of icons Icon Description Set the auto sequential menu Set the backup menu to backup video data from DVR HDD. Set the configuration menu to access recording settings, event settings, camera settings, account settings, network settings, storage settings, system configuration, and information Set the time search menu to choose a specific time of the recorded video to playback Set the event search menu to access the list of events recorded by the DVR. The event list will show the event occurrence time, event category, channel events, and other information. Set the PTZ mode Focus Mode *1 Set the Zoom-in function. The DVR supports zoom-in from 2x to 8x digital zoom Set image freeze function Disable image freeze function User Manual 11 Enable/Disable PIP *2 Switch to single split Switch to 4-split display Switch to 9-split display Switch to 10-split display Switch to 13-split display Switch to 16-split display Switch to 20-split display Switch to 25-split display Switch to 32-split display *1.Maya V2 Series not support focus mode *2 PIP not Support RHD-813B、RHD-1613B、HHD-2013B & DVR-3213B User Manual 12 2-1 Auto Sequential 16:9 display 4:3 Display Item Description Interval The time interval between each channel display All Channels The DVR automatically switches between channels with designated interval. The DVR shows each channel in a single-split mode. Quad-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 4-split mode. 9-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 9-split mode. 10-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 10-split mode. 16-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 16-split mode. 20-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 20-split mode. 32-Screen Division The DVR automatically switches between channels with designated interval. The DVR shows channels in 32-split mode. User Manual 13 2-2 Backup User can backup recorded video data of a specified time frame. The DVR can backup video data to either direct-attached storage, such as DVR or USB drive, or remote folder of a PC. 2-2.1 Selection Item Description From The start time of video data to be backed up To The end time of video data to be backed up Duration The time duration of backup file All It can select all channels or clear all selected channels to backup Required Space Show the size of the backup file User Manual 14 2-2.2 Select Backup Device Item Description Backup Device Select target device of backup (USB/DVD-RW/remote folder) 。 Status The status of target backup device Free Space The available space in the target backup device. (not available for remote folder backup) Start backup operation. Backup Be sure to calculate the size of backup file BEFORE operating backup. Do not unplug the USB device or turn off the DVR during the backup process to avoid unrecoverable error. User Manual 15 2-3 Configure Evoke the configuration menu, recording settings, event settings, camera settings, account settings, network settings, storage settings, system configuration, and information. Please refer to chapter 3 for detail. User Manual 16 2-4 Time Search Time search can search for the specific time of recorded data to playback. Note that dates with recording data are marked with a blue box. System will start playing video of specified time slot. Calendar will be shown by using mouse to click on “year” and “month”. Click “date” to display recording time of that specific date with time bar. You can change time (hour/minute/second) or click on a specific pint of time bar by mouse then press “ok”. DVR will playback the recorded data of the specific time. Item Description Playback button, start playback. Select playback time by sliding the position of the cursor to the specified time. The timeline scale is 24 hours. The blue chart represents available video data. User Manual 17 16:9 Display Playback configuration 4:3 Display User Manual 18 Table 2-4 Available keys on the remote control functions in the PLAYBACK mode Button Description ENTER/ MODE Switch to full screen or multi split display. MENU / Turn on/off PAUSE. PLAY Playback at normal speed. / SLOW Playback at slower speed. The speed will be slowed to 1/2, 1/4, 1/8 playback speed, by each pressing of the button till the slowest speed. / Fast rewind. Each press increases the rewind speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Fast forward. Each press increases the forward speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Stop playback. Table 2-5 the mouse operation under the PLAYBACK mode. Icon Description Stop playback, and go to previous page Play Pause Fast rewind, speed 4x, 8x, 16x, 32x Fast forward, speed 4x, 8x, 16x, 32x Slow playback, speed 1/2x, 1/4x, 1/8x Step playback Zoom-in display, 2x~8x digital zoom Full screen display Quad display 9 screen display 10 screen display 16 screen display User Manual 19 20 screen display 25 screen display 32 screen display If you want to monitor single channel, please double-click the preferred channel. 16:9 Display 4:3 Display P.S Can drag a small window User Manual 20 2-5 System Logs The DVR logs events automatically. The event list shows the logged events, event type, event detail, event filter (criteria), and page number of the event list. If the event video is logged, there is a gray video symbol "►" on the left of the event. Move the cursor to event line and press "ENTER", or double-click mouse button, DVR playback this record video related to the event. Note: If the hard disk is not installed or has not started recording, the DVR will produce the event list, but the user cannot playback the video of a specific event by clicking the event. Item Criteria Description Set the conditions for the event search Slide the slider to choose a page of the event list. The right numbers will show the corresponding page number Press left and right arrow keys or enter the page number directly. It will go to the select event page. Refresh the event list. User Manual 21 2-5.1 Search Criteria The number of event is up to thousands, therefore, to set "search criteria" to facilitate rapid classification of events. If the checkbox of start time and end time is checked, the event list will only display the events within the specific time slot. If the user unchecks some events and press the "OK ", the lists will only shows checked events. If you uncheck the channels, the event list will filter out unchecked the channels. User Manual 22 2-6 PTZ Operation Set up the camera PTZ settings in advance (refer to 3-3.1). Enter the PTZ configuration page, PTZ control panel displays the camera PTZ setting. There is a red cross on the center of the screen. Move the mouse to the Red Cross and hold down the left mouse button to the preferred location of the screen. The DVR will move the camera to the preferred place by placing the preferred place to the center of the screen. On the screen to move in any direction. It can control the PTZ camera in the direction. PTZ Configuration Rotate only for remote used 16:9 Display User Manual 23 4:3 Mode PTZ configuration Table 2-6 Function description Item Description ZOOM. Press + / - or move the slider to adjust the zoom level. FOCUS. Press + / - or move the slider adjust the PTZ focus IRIS. Press + / - or move the slider to adjust the PTZ iris Press left and right arrow keys to move the camera to the preset locations, and then press location to default point. to set current camera Press left and right arrow keys to move the camera to the preset locations, and then press era to next preset point. Rotate Video to change the cam- Make the display upside down User Manual 24 2-7 Zoom In the digital zoom mode, users may use the mouse to move the red rectangle of the zoom area. 16:9 display zoom 4:3 display zoom P.S Can drag a small window Item Description Zoom-in the area specified by the red rectangle. Zoom-out the area specified by the red rectangle. Exit zoom mode User Manual 25 2-8 Shortcut toolbar Real-time monitoring mode, move your mouse over the window function column appears above its fast operation ICON Description User login / logout: Auto lock is used. System Information: The host model, version, IP location, MAC values and hard disk information. Wide screen switching: Switch 4:3 / 16:9 monitor display. Screenshot. Turn on / off recording. Full screen. Options: Change the PC side screen shots, video storage path. Network Video Quality: You can follow the PC network bandwidth, adjust the image transfer traffic. Displacement Windows settings. Relays. The user can control the behavior of the relay on the DVR. ※ recording function, full-screen, options, image quality network for remote use of these four functions ※ screenshots, video features, options, these three features are only available in "iWatchDVR" use, IE 7/8/9 NOT support User Manual 26 2-8.1 network image quality Option Low Quality Single Image Low quality High-quality High-quality Description Low quality static mode: insufficient bandwidth used for one second about running 1 ~ 2FPS. Low quality Dynamic mode: According to the DVR recording settings. High-definition single image under static mode: insufficient bandwidth to use for one second about running 1 ~ 2FPS. High-definition Dynamic mode: According to the DVR recording settings. ※ image fluency: To all actual field-based network environment 2-8.2 Preference User Manual 27 2-8.3 Popup Setup Item Description Event Prompt window displays the channel status。 OSD Display time, HDD status, channel information, channel border. 2-8.4 Relay Setup Option Relay 1 ~ 4 Functional Description Relay J Series x1, N Series x2, B Series x4. open, close, automatically User Manual 28 Chapter 3 CONFIGURATION MENU PS. The initialization of new-installed HD is required before recording, please refer to “UTILITY SETUP” for detail. 3-1 Record Setup Item Record Mode Description Continuous Record/ Schedule Record/ Stop Record User Manual 29 3-1.1 Continuous Record Item Description Click Video Record Resolution icon, it will go to the video setting menu of this channel (below). In settings menu, press to save, press to go back to the original video settings menu *1 Enable / Disable recording for this channel Recording resolution selection *2 FPS Select recording frame rate, from 1 to 30 Quality Recording quality, from 10 to 100. The larger number means the better quality Audio Enable / Disable recording audio Note 1: Channel Source is "HD signal" no function User Manual 30 3-1.1.1 Video Settings 16:9 display video settings 4:3 display video settings Item Description Sharpness Adjust sharpness from 0 to 255 Brightness Adjust brightness from 0 to 255 Contrast Adjust contrast from 0 to 255 Saturation Adjust saturation from 0 to 255 Hue Adjust hue from 0 to 255 Volume Adjust volume from 0 to 255 User Manual 31 3-1.1.2 Event Recording Item Description Record Enable / Disable recording of a channel Resolution Recording resolution selection *2 FPS Select recording frame rate from 1 to 30 Quality Recording quality from 10 to 100. The larger number means the better quality Pre-Alarm Set the record seconds before the event, from 0 to 5. Post-Alarm Set the playback seconds after the event, from 0 to 100 Audio Enable / Disable audio recording of event record of the specified channel. Note 2: Different models have different resolution settings Input Setting NTSC (HD) NTSC (960H) NTSC (D1) PAL (HD) PAL (960H) PAL (D1) Resolution 1920 x 1080 944 x 480 704 x 480 1920 x 1080 944 x 576 704 x 576 User Manual 1280 x 720 704 x 480 704 x 240 1280 x 720 704 x 576 704 x 288 640 x 360 472 x 240 352 x 240 640 x 360 472 x 288 352 x 288 32 3-1.2 Schedule Recording Schedule recording can configure recording time by days of a week and hour. With the A, B, C, D four settings, users can set different recording scheme according to different configuration needs. In the day and time grid map, select the schedule time zone, and then press A, B, C, D one of the buttons to specify the video settings. 3-1.2.1 Configuration Item Name Description Change the recording name of the channel For the rest, please refer to 3-1.1 Continuous Record User Manual 33 3-1.2.2 Holiday Configuration The number of holiday is up to 50. When the time comes to the specified holidays, the DVR will start recording according to holiday configuration. Since holidays are different by different country and region, users can setup holidays according to user needs. User Manual 34 3-2 Event Setup 3-2.1 Video Loss 3-2.1.1 Configuration Item Enable Description Enable / Disable video loss detection function 3-2.1.2 Event Handling Item Description Log Write to event log when the video loss event happens. Event Record Select channel for event recording when event occurs. The video setup corresponds to the "Configuration → Recording Settings → Event Video Recording" (refer to 3-1-1-2 Event Record) Popup In the live mode, if video loss of a channel is detected, it will pop up the channel full screen. You can specify a warning window display, 1: the main screen, 2: the second screen.*1 Popup Channel Buzzer Relay When an event occurs, pop up the specified channel. Specify the DVR behavior of whether to activate the buzzer when an event occurs. Specify the DVR behavior of whether to activate the relay when an event occurs. PTZ Specify the DVR behavior of whether to change to the PTZ control mode to the specified channel when an event occurs. Go Preset Moves the camera to the specified preset point when an event occurs. Resume Preset Moves the camera back to the specified preset point when an event is finished. *1 Only for Maya V2 Series User Manual 35 3-2.1.3 Receiver Setup Item Description Enable Specify whether the DVR sends e-mail notice to specified users when an event occurs. Admin / Users Specify the receiver of e-mail notices 3-2.2 Motion Detection 3-2.2.1 Configuration Item Description Enable Enable / Disable the motion detection function of this channel Sensitivity The sensitivity value is from 0 to 100. The higher value means higher sensitivity. Motion Area Enter to setup motion detection area User Manual 36 3-2.2.1.1 Motion Area Setup The motion detection has been divided into 22 x18 grids. The default detection area is full screen. The screen is marked in transparent for detection area and grey for disabled area of motion detection. 16:9 display Right click on the screen appears the setup menu. 4:3 display Item Description CH01~ CH32 Selected channel motion detection function。 Mask Mouse Selection Switch between “select” and “deselect” for cursor-dragging function Detect All Area Select entire screen as detection area. Mask All Area Deselect entire detection area. Apply to All Apply the current settings to all channels Exit To leave and save settings Close Close and save the area settings menu. User Manual 37 3-2.2.2 Event Handling Please refer to 3-2.1.2 Event Handling 3-2.2.3 Receiver Setup Please refer to 3-2.1.3 Receiver Setup 3-2.3 Sensor ※ Each sensor name can be modified and remotely can enter various languages 3-2.3.1 Configuration Item Enable Polarity Description Enable/Disable sensor N.C: Sensor has not been triggered. When connected, sensor will be turned on N.O: Sensor has been triggered. When connected, sensor status will be turned off 3-2.3.2 Event Handling Please refer to 3-2.1.2 Event Handling 3-2.3.3 Receiver Setup Please refer to 3-2.1.3 Receiver Setup User Manual 38 3-2.4 System When the system event occurs, give a notice or warning according to the settings of relay, buzzer, and receiver. If the buzzer box is checked, the buzzer continually beeps for only errors related to the video (such as hard drives can’t write or not install the hard drive). The buzzer does not beep when other system events, such as login, log out or boot, etc., occurs. Item Description Buzzer Specify whether the buzzer beeps when a recording error occurs. Relay Specify the relay to be evoked when an event occurs. 3-2.4.1 Receiver Setup Please refer to 3-2.2.3 Receiver Setup. User Manual 39 3-3 Camera Setup Item Description Name Check the box to Enable/Disable mask function for the camera in the LIVE mode Channel name Timestamp Click on the blue screen to set position of the timestamp. Mask User Manual 40 3-3.1 PTZ Setup Item Description Enable Click the box to Enable/Disable PTZ function. Protocol Set up the protocol of PTZ cam. The supported protocol are: PELCO-D、PELCO-P、Merit LiLin 1、Merit LiLin 2、SAMSUNG、 LG-MultixE PTZ ID Set up PTZ ID. The valid ID value is from 0 to 255. Baud Rate Select Baud Rate of PTZ control protocol from 2400, 4800, 9600,19200 User Manual 41 3-4 Account Setup You can set the user password and permissions of 10 user accounts (1 admin + 10 users). These different accounts gives users different permissions of DVR features. 3-4.1 Administrator The default admin account and password is “admin” and “123456” Item Description Enable Check to activate the user’s account. Expire Set the expire date of the user account Name Set up the username Password Set up the password. The password can be mixed of letters and numbers and is case-sensitive. e-Mail Set up user email User Manual 42 3-4.2 Other Users Item Description Enable Check to activate the user’s account. Expire Set the expiration date of the user account Name Set up username Password Set up the password. The password can be mixed of letters and numbers and is case-sensitive. e-Mail Set up user email 3-4.2.1 Permission The Account Setup is set to provide individual user role-based permissions, including access to Setup menu, Network operation, PTZ function, Playback, Utility, Backup, Password expiration date and Mask on specific channels while playing back. Item Description Console Playback Allow the permissions to playback channel in local side Remote Live & Playback Allow the permissions to live monitor/playback channel in remote side Console Remote Allows the permissions to operate in local side (Live, Playback, Backup, Configure, System, PTZ) Allow the permissions to operate in remote side (Live, Playback, Backup, Configure, System, PTZ) ※ use of local, remote permissions, respectively, the option must be checked, otherwise it will not work User Manual 43 3-5 Network Setup Item Description DHCP The DVR retrieves from a DHCP server automatically. Static IP Set up a Static IP address of the DVR. PPPoE Set up the username and password for PPPoE connection. 3G Setup Set up the login configuration of 3G connection HTTP Setup Set up the HTTP configuration for remote access. DDNS Set up the DDNS configuration. NTP Set up the NTP configuration Mail Setup Set up the mail sending configuration FTP Setup Set up the FTP configuration User Manual 44 3-5.1 Networking Setup There are three ways to connect to the network. 3-5.1.1 DHCP Setup When DHCP is selected, IP address will be assigned by DHCP server automatically. Notice: The IP address shown in this page is not the IP address obtained from the DHCP server. The IP obtained from the DHCP server is shown in the System Information Page. 3-5.1.2 Static IP Setup Setup Static IP for network connection, the following information is required. Item Description Enable Enable / Disable Static IP function。 IP Enter the static IP address provided by ISP Subnet Mask Enter IP address of Subnet Mask provided by ISP User Manual 45 Gateway Enter IP address of the Gateway provided by ISP DNS Enter the DNS address provided by ISP. (Note: The correct DNS address must be entered for DDNS function). 3-5.1.3 PPPoE Setup Select PPPoE for network connection, the following information is required. Item Description Enable Enable / Disable PPPoE function。 User Enter user name provided by ISP Password Enter password provided by ISP 3-5.1.4 3G Setup Using the USB 3G dongle to access the network PS: only specific chip of 3G dongle is supported and the 3G dial-up features may not be compatible to some ISPs. User Manual 46 Item Description Enable Enable / Disable 3G function. Dial Number Dial-up Number, offer by the ISP PIN Enter SIM card password APN Enter “internet” or other value offered by the ISP. User Enter ISP username Password Enter ISP password 3-5.1.5 Bandwidth Limited Option Description Bandwidth Range : 1~9999 Limited Kbps 、Mbps User Manual 47 3-5.2 HTTP Setup Item Description Enable Check to enable HTTP server. Users can remotely access into the DVR over the network if the HTTP function is activated. Port Enter a valid port value from 1 up to 65535. The default value is 80. 3-5.3 DDNS Setup User Manual 48 Item Description Enable Enable / Disable DDNS function. Enter the registered DDNS Server: ez- dns.com、i-dvr.net、dyndns.org Server ez- dns.com、i-dvr.net Supports automatic assignment DDNS When these two DDNS service, The system will automatically bring up to C + DVR Mac Address last six yards at the beginning of a host site, Such as the Mac end of the six yards of FD5CCD, Then bring out the host site at CFD5CCD.i-dvr.net or CFD5CCD.ez-dns.com Host Enter the full DDNS address. (Including username + Server) If the user name is h.264 and you choose i-dvr as your server, you should enter: h.264.i-dvr.net User Enter user name. Password Enter password. *For more detailed I-DVR.NET operation instruction, please refer to appendixⅠ、Ⅱ 3-5.4 NTP Setup Setup he feature of network time synchronization. Item Description Automatically Synchronize Check to enable DVR automatic synchronization function when rebooting Update Interval (Hours) Setup interval for time synchronization Server Setup time server address Update Now Update the time information from the NTP server immediately. User Manual 49 3-5.5 Mail Setup The Mail Setup tab controls the email-sending configuration when the DVR needs to send e-mail to specified users. Item Description Enable Check the box to enable/disable E-mail Notification function SMTP Server Set up SMTP Server name and port User Enter to set up the username. Password Enter to set up the password. Sender’s e-Mail Enter to set up e-mail address of the sender. User Manual 50 3-5.6 FTP Setup Item Description Enable Check the box to enable/disable FTP function Server Set up FTP Server name and port User Enter to set up the username. Password Enter to set up the password. Directory Upload FTP directory path User Manual 51 3-6 Storage Setup 3-6.1 HDD Setup ※ Click the status bar to change the attributes of the hard disk Item Description Video Preservation (Hours) Setup the video preservation period. Recorded video will be deleted automatically after expiry of preservation period. Model Display HDD model Status Display HDD status (Recording/Error) Attribute Display HDD Attribute ( Overwritable/Writable/Read-Only) Free/Capacity Display HDD capacity (Free/Capacity ) Check the hard disk drive and press "Format", there are four options to set the HDD. Format Start Format HDD DVR. Status bar "successful" HDD initialization! Enter the menu, there will be all of the hard disk information (model, capacity). Overwritable Set the hard disk to be replicated state will start to overwrite the hard disk is full. Writable Set the hard disk as writable state, after the hard disk is full stop writing. Read-Only Set the hard disk is read-only, read-only cannot be written to the hard disk. User Manual 52 3-6.2 USB Flash Derive Setup Item Description Model Display USB flash drive model Free/Capacity Display USB flash drive capacity (Free/Capacity ) 3-6.3 DVD-RW Setup Item Description Model Display DVR-RW model Media Type Display disk type Free/Capacity Display DVR-RW capacity (Free/Capacity ) User Manual 53 3-7 System Setup RHD Series: HHD Series User Manual 54 960H Series Item Description DVR Name The name of DVR to be shown while users login from remote site. Language Specify the OSD language. Video Format Detection Specify the format of video signal (auto-detect, NTSC, PAL). The configuration requires DVR reboot to take effect 3-7.1 Auto Lock Item Description Enable Enable / Disable Auto Lock Timeout(Seconds) Set the number of seconds to wait. It there is no action, the panel will be automatically locked and the DVR logs out current user. When DVR logs out automatically, it only supports basic operations, such as picture freezing, picture, zoom, and auto switch channel, screen-split. To enter the setup menu, search menu, backup menu, status query, playback, and other operations, users need to input the username and password to login in. Available timeout value is from 10 to 9999 seconds 3-7.2 Auto Reboot Item Description Disable Enable / Disable Auto Reboot. Every day Setup the time of daily auto-reboot. Every Week Setup the time of weekly auto-reboot. User Manual 55 3-7.3 Date/Time Setup Item Description Hour Format 12HOURS/ 24HOURS Date Format MM-DD-YY/DD-MM-YY/YY-MM-DD 3-7.3.1 Time zone Item Description Time Zone Setup Set up the time zone of the DVR, from GMT - 13 ~ GMT+ 13。 Daylight Saving Time Enable / Disable Daylight Saving Time 3-7.3.2 Daylight Saving Time Setup Item Description Beginning Setup the beginning time of Daylight Saving Time. Ending Setup the ending time of Daylight Saving Time. User Manual 56 3-7.3.3 Change Date and Time Setup date and time of the DVR. User Manual 57 3-7.4 Monitor Setup This feature is only support "Maya v2" series models. Users have to decide which one is the main screen, which is the second screen. In the setting can be used when there are three configurations. In duplicate mode, both monitors display the same content. In the HDMI (1) VGA (2) mode, HDMI will be the screen 1, VGA will be the screen 2. In VGA (1) HDMI (2) VGA mode, VGA will be the screen 1, HDMI will be the screen 2. BNC output terminals are the same as with the contents of a screen 1. Screen 1 and Screen 2 output can be set separately in the upper left corner of the scr een will show the current number. User Manual 58 Monitor setup Item Description 1、2 set the main screen (1), the second screen (2) screen display setup menu Resolution selection screen resolution Border Color Set the color of border Luminance Setting brightness, from 0 to 100. Contract Setting screen display color contrast, from 0 to 100. Saturation Setting screen display color saturation from 0 to 100. Hue Tone color tone setting screen displayed from 0 to 100 Administrators can set up two separate configuration screen, you can display a live view screen contents, and another replay content. When managers are controlling them one screen, in the upper left corner of CH1 have a mouse icon appears. To switch between the two screens, you can press the shortcut bar dual screen switching button. User Manual 59 3-7.5 Input Setup The Input Setup allows users’ setup input device (Key Tone, Remote control, Panel, Mouse, Keyboard, Touch screen). Item Key Tone Description Enable / Disable Key Tone. 3-7.5.1 Remote Control Setup Item Description Enable Enable / Disable remote control. IR ID Default ID is 0. DVR is controlled by standard remote control; For one to many remote control, remote control on the number corresponding to the DVR numbers (DVR1 → IC01, DVR2 → IC02). Test Enable / Disable test function. Pressed Key Display pressed key information. User Manual 60 3-7.5.2 Panel Setup Item Description Test Enable / Disable panel button test function. Press Key Display information of the pressed key. 3-7.5.3 Mouse Setup Item Speed Description Setup the mouse cursor speed. The right side of the slider means faster mouse speed. (Only valid for local configuration) User Manual 61 3-7.5.4 PTZ Keyboard Setup Item Description RS-485 ID RS-485 ID, valid values range from 1 to 64 RS-485 Baud rate RS-485 Baud rate from 2400, 4800, 9600, 19200 Keyboard Select PTZ Keyboard Test Enable / Disable keyboard test function Press Key Display press key information 3-7.5.5 Touch Screen Setup Detects the touch screen Users can calibrate the touch screen which needs recalibration. User Manual 62 3-7.6 Utility Setup Item Description Export Configuration Export DVR configuration to a USB flash drive or a remote PC. Import Configuration Import configuration from a USB flash drive or a remote PC to DVR. Reset Configuration Reset system configuration. Export Logs Save DVR system log to a USB flash drive or a remote PC. Clear Logs Clear all DVR system log. Upgrade DVR firmware through a USB drive. Please stop recording and backup DVR configuration before upgrading System will reboot automatically when the upgrade is done. Upgrade Firmware User Manual 63 3-7.6.1 Export Configuration There are several options for target storage of DVR configuration. a. Export to a USB Flash Drive: The default filename is “dvr.cfg” b. Save *.cfg as PC User Manual 64 3-7.6.2 Import Configuration Import configuration to the DVR from a USB drive or a remote computer. a. Import from USB Flash Drive: Import the configuration from a USB flash drive. b. Open *.cfg from PC User Manual 65 3-7.6.3 Reset Configuration Reset the DVR to default settings. 3-7.6.4 Export Logs a. Export to USB Flash Drive: Export logs to a USB flash drive. The default file name is “log.csv” b.Save *.csv as PC User Manual 66 3-7.6.5 Clear Logs Clear the system logs. User Manual 67 3-7.6.6 Upgrade Firmware Notice! DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE because that may cause incomplete firmware upgrade and damage the DVR. a. Upgrade from USB Flash Drive...: Choose the firmware from USB flash drive to upgrade b. Upgrade from PC : Choose the firmware from PC User Manual 68 3-8 System Information 3-8.1 DVR Information Item Model Version Description DVR model name and video type DVR firmware version 3-8.2 Network Information Item Description DVR IP address If there is no network connection, it will show "Network is not connected. The DVR MAC address IP MAC 3-8.3 HDD Information Item Recording Scheme Model Status Attribute Capacity Description Display installed HDD recording type Display installed HDD model Display installed HDD recording status Display installed HDD attribute (Overwritable/Writable/Read-Only) Display installed HDD capacity (Free/Capacity ) User Manual 69 3-8.4 S.M.A.R.T Information User Manual 70 REMOTE SOFTWARE INSTALLATION and SETUP The DVR allows users remotely access and control the DVR from a PC by 「iWatchDVR」or IE v6.0 or above. p.s. The DVR currently supports Windows XP SP2 or above and Windows Vista, Windows 7. 3-9 Application Software Connection Step 1:Enter the IP address of DVR in IE browser. Step 2:Windows as below will show up. Please enter the user name and password. Default user name and password is admin/123456. Other related setup about user account and password, please check the section “Account Setup. “ User Manual 71 Step 3:Click on the link ”iWatchDVR for Windows XP/Vista/7” to start downloading the AP software. Step 4:The program can be run directly, or save the program to the remote PC and execute later. If you choose to run the software, Start window will be shown up. Please enter information of login DVR: IP, Port, Username and Password. The drop-down menu can be used to record IP address. Press “Clear” to clear IP address. User Manual 72 Step 5:You’ve logged into the DVR 3-10 IE Connection Step 1:Enter the IP address of DVR in IE browser. The address appeared in this image is only for demonstration. Actual address is depending on the setup of on-site DVR Step 2:Windows as below will show up. Please enter the user name and password. Default user name and password is admin/123456. Other related setup about user account and password, please check “Account Setup. “ The user name and password appeared in this image is only for demonstration. Actual user name and password depend on the setup of on-site DVR. User Manual 73 Step 3:Click on” iWatchDVR for Internet Explorer 7/8/9 ”. p.s. There will be IE connection security issue when clicking this link for the first time. Please refer to index III for Remote Monitoring IE ActiveX Control Installation Instruction. Step 4:DVR images appear.。Default is 4:3 display. User Manual 74 3-11 AP Software and IE Connection Operation Table 4-3.1 System Requirements CPU Intel Core 2 Due above OS Microsoft Windows 7, Windows Vista, Windows XP SP2 above RAM 4G above VGA Card Needed to support DirectX9.0 (Above) Note 1 Anti-virus softThe TCP destination port 80 should be available. ware (firewall) Others DirectX 9.0 above Note 1: Known VGA card that support DirectX9.0 currently: NVIDIA: GeForce FXseries, GeForce 6series, GeForce 7series, GeForce 8series, GeForce 9series, GeForce 200series, etc. Or visit: http://en.wikipedia.org/wiki/Comparison_of_Nvidia_graphics_processing_units ATI: Radeon R300series, Radeon R400series, Radeon R500series, Radeon R600series, Radeon R700series, Radeon HD 3xxx IGPseries, Mobility Radeon series (9500 above), Mobility Radeon X series, Mobility Radeon HD series, or FireGL V series etc. Or visit: http://en.wikipedia.org/wiki/Comparison_of_ATI_graphics_processing_units SiS: SiS 67Xseries, or SiS 77Xseries etc. Or visit: http://www.sis.com/support/support_compare.htm Intel: 91Xseries, 94Xseries, 96Xseries, G3Xseries, or G4Xseries, etc. Or visit: http://en.wikipedia.org/wiki/Intel_GMA User Manual 75