Download Procidia i|Ware PC - Introduction - Service, Support

TIME
The TIME box displays the time set on the Real Time Clock option board in the
controller.
SET Button
The SET button opens a check box that enables the selection of which screen will be
opened when the Loop button is selected.
RUN Button
If for any reason the station is in the Configuration HOLD mode, the RUN button can be
used to return the controller to normal operation (i.e. RUN mode).
OOS Button (V2.0)
The OOS button (Alarms Out Of Service) can be used to mark all controller (station)
alarms as Out Of Service. When alarms are marked out of service they will function
normally and the OOS bit in the alarm status word will identify to HMI displays that
alarms have been flagged as OOS. This feature is normally used when someone is
working with the controller and wishes to identify this situation to others that may be
monitoring the alarms within the system. The OOS text will change color when the Out
of Service condition exists. The controller OOS button is available in controller firmware
V2.0 & higher.