Download VT Plus HF
Transcript
VT Plus HF Operators Manual Low-Flow Screen The Low-Flow screen displays the signal and statistics for the flow in the low-flow port of the Analyzer. fec050.bmp Range Press the RANGE soft key to change from a high-flow screen to a lowflow screen or back again. Units Press the UNITS soft key to change the units of measure for the lowflow screen. Possible units of measure for this screen include: Re-scale LPM Liters per minute CFM Cubic feet per minute LPS Liters per second ml/min Milliliters per minute ml/sec Milliliters per second Press the RESCALE soft key to change the scale on the plot of data to a more appropriate window of values. Note RESCALE uses the current min/max values to determine plot limits. Clear Press the CLEAR soft key to reset the statistics and re-start the plot. The user can select the breath parameters displayed on this screen by following the instructions under Selecting Breath Parameters. 3-12