Download Chapter 2 - Using the ARENA Controller

Chapter 2 - Using the ARENA ControllerSystem Page
Chapter 2 - Using the ARENA Controller
System Page
„ Radius Proxy: Select whether to use the built-in RADIUS server (Radius Proxy Disabled, which is the
default) or external servers (Radius Proxy Enabled).
„ Local Server Secret: The Secret string to be used for communicating with the built-in server.
Applicable only if Radius Proxy is Disabled.
„ Authentication Server: Applicable only if Radius Proxy is Enabled. The IP address and port (default is
1812) of the remote Authentication server.
„ Accounting Server: Applicable only if Radius Proxy is Enabled. The IP address and port (default is
1813) of the remote Accounting server.
„ Remote Secret: Applicable only if Radius Proxy is Enabled. The Secret string to be used for
communicating with the remote server(s).
NOTE!
After making any changes click on the Save Settings button of this section.
2.10.1.5 Restart Controller
Figure 2-91: System Page General Tab, Restart Controller Section
Click on the Restart button to restart the controller.
2.10.2
Accounts Tab
The Accounts tab includes the following sections:
„ Admin Account - Password
„ Admin Account - Email
„ AP SNMPv3 Settings
„ AP SNMPv1/v2c Settings
„ SMTP Server Settings
„ Operator Accounts
2.10.2.1 Admin Account - Password
Figure 2-92: System Page Accounts Tab, Admin Account - Password Section
The Admin Account - Password section enables changing the password for the admin account:
Arena Controller User Manual
100