Download Universal PROM Programmer Operation Manual

Warning: The value of negative offset is subtracted from real address and
therefore a result of subtraction can be negative number.
Because take care of correct setting of this value.
Language
This page allows you to select another language for user interface such as
menu, buttons, dialogs, information and messages. It also allows to select
wished help file in another language. For another language support of user
interface the language definition file is required.
Sound
Sound page allows user to select the sound mode of program. Program
generates sounds after some activities, e.g. activities on device (programming,
verifying, reading, etc.). Program generates sound also when warning or error
message is displayed. User can now select sound from Windows system sound
(required installed sound card), PC speaker or none sound.
In the panel Programmer internal speaker sound settings is possible to set
sound options for some programmers with built-in internal speaker. Sound
beeps are then generated from internal programmer speaker after each device
operation for indicating device operation result – good or bad result.
Log file
This options associates with using of Log window. All reports for Log window
can be written into the Log file too. The Log file name is "Report.rep" as default.
The control program creates this file with name and directory specified in Log
file name edit box.
Following Log file options are available:
•
•
•
No default, content of Log window is not copied to Log file, i.e. all
reports will be displayed to Log window only
New deletes old Log file and creates new one during each start of
control program
Append adds Log window reports into existing Log file, If file does
not exist, the new file will be created
Checkbox Add date information to Log file name allows user to set date
information into Log file name specified by user in Log file name edit box. When
the checkbox is checked, program automatically adds current date string into
user specified Log file name by the following rules:
If user specified log file name has format:
<user_log_file_name>.<log_file_extension>
The name with added date will be:
<user_log_file_name><-yyyy-mmm-dd>.<log_file_extension>
The new part representing of date consists of yyyy - year, mmm - month and dd
80
MINATO ELECTRONICS INC