Download Sport Gamcorder

FULL HDl
OSOP
Sport Gamcorder
User Manual
Please read through this user manual before using the
product and keep the manual for future use.
Please operate the camera on basis offull understanding
ofthe manual.
Any alteration of product appearance and specification
below are withoutfurther notice.
Precaution
Accessories
Pls be well noted with the following guidelines before you
use this camera,
* Pls refer to manual instruction and operate the camera
correctly. lllegal operation may cause damage to camera
Standard Accessories
1, Goggle belt
internal components.
* Do not fall or hit the camera, it may damage the internal
components.
* For your safety, please keep the camera from the children
and animals, in order to avoid accident
* Do not place the camera in a damp or dusty location for
extended periods of time. This may cause a fire or an
electrical shock.
* Do not leave the camera in places exposed to extremely
high temperatures, such as under direct sunlight for
extended periods of time. This may affect the camera
housing and internal comPonents
* We recommend using batteries in temperatures between
0Cto 40C.
. Turn off the camera before removing the memory card, in
case of the damage of card or storage data.
*
The camera is matched with waterproof case. Pls use it
when the camera needs to keep water away. We should
take no responsibilities for the damage of camera or
leakage because of it.
*
The temperature rise is normal after using the digital camera
for a long time.
* Do not touch the lens during using the camera, so as not to
influence the photography effect.
* Please use the air blower (special lens blowing equipment)
to clean lens or use special lens-cleaning cloth to clean
fingerprint or dust on the surface.
2, 3M pads
3, USB cable
4, HDMI cable
5, AC Charger
6, User manual
7, Nylon velcro strap
8, Handlebar grip
9, Flat base pedestal
10, Curve helmet pedestal
1 1 , Sponge rubber pads
12, Waterproof case
13, Remote control
14,User manual
Optional Accessories
5, Car charger
6, Suction cup bracket
17, GPS module/ Disk
1
1
Operation lnterface lntroduction
Mounting Description
lnterface lntroduction
The camera can be mounted in many ways. Please follow
the methods of mounting as suggested below:
1, Lens
2, Left key
3, Right key
4, Menu key
5, Playback key
6, Reset key
7, REC key
8, Mode key
9, Power key
10, Mtc
1, Mount the flat base pedestal
1 ) Mount the flat base pedestal onto surfboard
Put the camera into the waterproof case and lock well,
install the camera bracket into flat base pedestal, stick
flat base pedestal with 3M pads and then attach to
surfboard directly. (As picture 1,2,3,4)
w
11, lnfrared receiver
1 2, Working/Charge indicator
3,
14,
15,
16,
1 7,
1 8,
1 9,
20,
1
LCD screen
SD slot
GPS port
HDMI port
USB port
Back cover
2) N/ount the flat base pedestal into sliding plate or sledge
and so on
lnstall the camera bracket into flat base pedestal, stick
flat base pedestal with 3M pads and then attach to the
surface of sliding plate or sledge, etc.(As picture 1, 2)
Locker
Speaker
Standby Display lnstruction
1, Loop recording icon (displayed under video time mode,
and not displayed under normal recording mode)
2, Resolution icon (1 080P/720Pl640)
3, GPS signal icon (green icon means good signal,
red icon means no signal)
4, Remaining record time (means the
estimated time can the storage
card be recorded, during recording
it displays the recording time in
Pic
progress)
5, Battery icon (charging indication;
the power grid varies according
battery power, turning red means
lowpower)
6
6
o
6/7, Displaying year, month and date when Date Stamp
function set on, no displaying when Date Stamp set off)
4
1
Pic2
;X
2, Mount curve helmet pedestal
1) Mount to the side of helmet
Mount goggle belt to curve helmet pedestal, then tie the
belt around the helmet, adjust curve helmet pedestal to
the right position, then fix it firmly onto the helmet using
3M sponge rubber pads, install the camera bracket into
curve helmet pedestal.(as picture 1, 2, 3)
,,",K,,",m,",&f
2) Mount to the top of helmet
Thread the nylon velcro strap into curve helmet pedestal,
then thread the nylon velcro strap into helmet and fasten
ffiil
Pic'l
Pic2
3, Mount handlebar grip
Button Function Description
Power key(
on/offthe camera; to clear screen
characte r
Mode key (uooe): to switch to capture mode and video mode;
to delete files under playback mode
REC key ( O ): take photos and videos, and stop taking
Menu key (ueru): to enter into and exit menu setting, and
quit playback under playback mode
Playback key (E ): to browse photos and videos, to confirm
settings under setting mode
Left key ( { ): to choose the last menu orfile, zoom out
the image, and reduce voice volume under
playback mode.
Right key ( I ): to choose the next menu or file, to zoom in
the image, and increase sound volume
under playback mode.
Reset key:
to resetthe camera system.
As shown in below pictures, screw the handlebar grip into
the camera grip, and mount it onto the motorcycle or bike.
lnsert and take out storage card
1. lnsert the storage card
1 ) Open the camera back cover
2) lnsert the card according to the right direction
3) Close the back cover
2, Take out the storage card
1 ) Turn off the camera power and open the back cover.
2) Press the end of the storage card slightly, it will eject
Reset Key
ln case the camera is dead or not able to work properly,
press in the hole of reset key, camera return to normal
shut off status, to continue operation, press power key
automatically.
3) Close the back cover
agai n.
Turn on/off the camera
7
Battery charging
Connect the USB port of charger with the USB port of
camera, and then plug in the power. During charging, the
red indicator is on, when fully charged, the indicator is off.
Notice:
a) ln order to improve the charging efficiency, please
charge the camera under the shutdown status.
B) Please make sure the AC power is turned on when the
charger is plugged.
): To turn
videos
Pic 4
Notice:
Please confirm the inserting direction of the SD card
because reversed inserting may cause damage to the
camera and the SD card;
O
J
1, Turn on
Press once "O " key, with one beeping sound camera
starts up. On the top of LCD screen it displays the
resolution icon, remaining recording time of card
separately; at the bottom of LCD screen it displays the
battery icon, date and time.
(Remark: when video time mode is set, camera will
automatically record after power up)
2, Turn off
Press " O "key for 3 secs, it will turn off after one beeping
sound.
Video Mode
1, Normal Recording
When the camera is on, set the menu of "video time,, to
"Close" (refer to "Video Mode"setting), press,,o ,,key
once to take video, the recorded time and recording icon
are displayed on the top of LCD screen, press,,a,, key
again to stop recording and save the video files, the
remaining recording time is displayed on the top of LCD
screen.
(Remark: Camera gives out different sounds between
starting recording and stopping recording)
2, Loop recording
(1) Set record overwrite time in the menu of "video time" to
2 or 5 mins (refer to "Video Mode" setting), press " O "
key to start recording, when it records to 2 or 5 mins
(according to the time you set), the DVR will stop
recording automatically and save the video footage
and then continue recording;when SD card is full, DVR
will delete the first video footage automatically and
continue recording and so on.
(2) Press"O "key once to stop recording and save the video,
the remaining time is displayed on the top of LCD screen
(3) The loop recording icon is displayed on the left top of the
screen.
Capture mode
1, Press "Menu" key to switch to capture mode, aim at the
object you want to shoot and press" O " key, it will save
the photo automatically.
2, Automatic photo
Under capture mode, set the self capture time in the
menu "automatic photo" (refer to Capture Mode setting),
camera will keep taking time-tapse photo automatically
as the time you set. Press "MODE"key to quit auto
capture and switch to video mode.
Zoom in/out
Under recording or capture mode, press
in/out the image.
8
{ /}
key to zoom
Glear screen
Under standby, video, capture or playback mode,
press O keyoncetoclearall characterson screen.
Press
O
key once again, the characters will recover.
Playback mode
Under standby mode, press "E " key to enter into playback
mode, "Capture Play/Video Play/ G-sensor Video/Cycle
Video" will be shown on the screen.
Press{ />key to choose the options, press" E " key to
confirm.
During picture browsing, press { / } key to browse last
/next one.
During video playback, press once"E" key to pause,
press " El " once again to continue, press .( / ) key to
adjust volume.
Press "MENU" key to return.
Delete File
Press once " E " to enter playback mode: "Capture Play
/Video Play/ c-sensor Video/Cycle Video", Press {/ } to
choose the option, press "EI"key to confirm, press"MODE"
key to enter into Delete Menu.
Press{/ } to choose "Delete all" or "delete"(the current
file), press" E " key to confirm again "YES" or "NO"
deleting the file. Press "Menu" key to return.
Remark: When set G-sensor as "4G / 8G" in Setup Mode,
in case camera is crashed, there will save crash
video footage, it cannot be deleted from the
camera directly. Only through formatting card or
from the PC can the crash footage be deleted.
Setup mode
Play back video footage on TV
Under standby mode, press'MENU'to enter into setting
Turn the camera on, connect the HDMI port of camera
to TV via the HDMI cable, choose HDMI mode on TV.
The LCD screen of camera will be off automatically, all
operation functions can be shown on TV.
mode, press
{/}
keytochoose option, press"tE "key
to confirm.
1,
Capture mode
SIZE: 16M (4608"3456), 5M (2592-1944)
Quality: High/Normal/Low
EY:1l2lOl-11-2
White Balance: Auto/Daylight/Cloudy/Tungsten
/Fluorescent
Automatic photos: Close/3secs/5secs/1 0secs/30secs
/1 min
2, Video mode
SIZE: 1 080P 30FPS, 720P 60FPS, VGA 1 20FPS
EY:1l2l0l-11-2
White Balance: Auto/Daylight/Cloudy/Tungsten
/Fluorescent
MIC Volume: OFF/ Level One/Level Two/Level Three
/ Level Four
Video time (loop recording): Close/2 mins/S mins
Anti-shaking: Open/Close
3, System Setting
Language: English/CHS (simplified)
Format: Yes/No
Date Set: YYYY/MM/DD/HH/MM
Screen saver: 30secs/1 min/5mins/off
Default: Yes / No
G sensor: 4Gl8G/Close
Key Sound: Open/Close
Screen Convert: Normal/lnverse
Version : ISPORT2-H0X-S0X
Light Freq: 50 Hzl6O Hz
Auto off: Close/1 min/3 mins /5 mins
Date Stamp: Open/Close
Sound Set: Oft 130%150%lSOVollOO%
Play back video footage on PC
Turn the camera on, connect PC with camera using
USB cable, open"My Computer", + open removable
Disk and you can find 3 folders, GSENSOR folder,
PHOTO folder and VIDEO folder. Choose the folder
and browse corresponding files.
Remote control instruction
the"l "key to choose
resolution, press"a "once to start recording, and
press"o " key again to stop.
2, Under Capture mode, press the"I "key to choose
image pixels, press" a "once to take photo.
3, Press" I "key or " a "key per time, the red indicator
on the remote control flicks.
1, Under Video mode, press
Technical specification
Sensor:
5 Mega CMOS
Resolution:
Video
1080P 30FpS, 1920,i080
720P 60FPS,1280-720
vcA
size:
lmage
Storage:
Lens:
120FPS,640.480
5M (2592"1944);
1
6M (a608.3a56)
TF card, support up to 32G
Wide angle & rotatable
160" under 1080p
170. under HD720P&VGA
Video
format:
MOV
lmage
format:
JPG
Audio:
Built in MlC, speaker
Port:
USB/HDM|/GPS
Battery:
Built in 1200mAh Li-polymer battery
Screen:
1.5 inch LCD
Remote:
Infrared remote control