Download User`s Manual

Transcript
AXIS110 User's Guide
(V)iew
(T)rack Rx
(E)rase
(O)rientation
(S)catter
(W)orst-Case
(Y)axisscan
(C)learance
[AntennnaDesigner]
AntennaSystemDesignModule:
<Spareline>
Enter element spacing (m) (F2)Wavelength *
Enter element spacing (lambda) (F2)Meter *
Enter number of antennas in the array *
(F2) Chebychev feeds <CR> User defined :
Enter sidelobe level (14 - 99dB)
*
(F2) Dual Frequency <CR> Single :
ListAntennasfedthroughADUAttenuator,:
delimited by spaces. e.g. 1 2 3 10 11 12 :
NOTE: Only half system [FLY LEFT SIDE] is entered... :
Distance from array center (m) :
SBO :
CSB :
CLR :
Amplitude:
Phase :
(% of MAX CSB) :
Antenna:
Center ant. :
Example:Normarc12elDual<-Maxlength:
Enter System name
:
(I) - Isotropic :
(H) - Dipole (half Lambda) :
(D) - Dipole w/reflector :
(L) - Log Periodic Dipole :
(T) - Th-CSF Frame :
(V) - V-Dipole (CLR) :
AntennaelementType:
Current FILE name :
Max 8 characters.... :
System filename :
Antenna System Ready..... :
(F2) List Array feeds (F3) Save <CR> Control Panel :
[Endoffile]
A2-16
20 JUN 2005