Download Manual - Alge

Transcript
Photo Finish OPTIc2.NET
Requirements for IEEE 1394 interface for PC:
Compatibility:
IEEE 1394A or 1394B, OHCI compatible
Transfer Rate:
min. 400 MBit per second
Minimum Requirements for the PC (Desktop or Notebook)
Operating system: Windows XP, Windows Vista, Windows 7 or Windows 8
Processor:
Intel i5 (or better)
Hard Disk:
minimum 250 GB (the faster the better)
Storage:
minimum 4 GB RAM
Graphic:
minimum 128 MB graphic RAM
Monitor resolution: minimum 1024 x 800, better 1600 x 1200, 1920 x 1024 or 1920 x 1200
Interface:
IEEE 1394A or 1394 OHCI compatible
Display Board Interface "display board":
Transfer Format:
1 start bit, 8 data bit, no parity bit, 1 stop bit
Transfer Speed:
2.400 Baud
Transfer Protocol:
ASCII
Data Format:
The data format has 24 ASCII characters. The 24th character is carriage return. It sends every
1/10 second one data string. The fourth character is a point for the running time (running time),
a blank for a zero time, or a C for a stop time (run time). For a standing time (run time) you can
have, depending on the adjusted precision, 1/10, 1/100, 1/1000, or 1/10.000 seconds. Using
this adjustment only the winner time is sent to the interface (and intermediate times)
1
2
123456789012345678901234
C
HH:MM:SS.zht
(CR)
.
HH:MM:SS.z
(CR)
Number of ASCII characters
run time with 1/10000th precision
running time
. ........ the fourth character for running time, the 17th character for separation between
seconds and 1/10 seconds
HH ..... hours
MM .... minutes
SS ..... seconds
Z ........ 1/10 seconds
H ....... 1/100 seconds (depending on the precision)
T ........ 1/1000 seconds (depending on the adjusted precision)
(CR)... the 24th character is Carriage Return
Page 69