Download User Guide Version 4 for Windows®
Transcript
Chapter 3: Analysis Module Functions and Commands Meters Options Menu > Meters The settings in the Meters tab of the Options dialog box control the appearance and behavior of the Input Level Meters in the Record Wave File dialog box. The meters are calibrated to regard the maximum digital output of the A/D system of the sound card being used normally 16-24 bits) as 0 dB. Peak Hold • Peak Hold — When this box is checked the input level meters will continue to indicate the highest input level encountered in the input signal for a specified period of time after the level drops. • Hold Peak For — Specifies the length of time (in seconds) the meters hold peak levels when Peak Hold (see above) is enabled. Meter Colors The input level meters in the Record dialog are designed to display three colors, the normal “LED” color (Light Green for input 0 and Light Blue for input 1 when the default Color Scheme is used) plus Yellow and Red. The meter “LEDs” will display input levels in the normal LED color up to the amplitude threshold specified for Yellow, then Yellow up to the threshold for Red, and Red above that level. • Yellow if above — Sets the amplitude threshold at which the meter LED color changes to Yellow. • Red if above — Sets the amplitude threshold above which the meter LED color changes to Red. Appearance Meter (Options for the appearance of the area immediately surrounding the meters). • Raised — The meter area will appear to protrude from the background. • Inset — The meter area will appear to be sunken into the background. • Flat — The meter area will be indistinguishable from the background. Page 92 SIA-Smaart Acoustic Tools Version 4 User Guide