Download Product Reference Guide

Codabar Enable
Codabar Maximum Label Length
This feature specifies the maximum allowable length of a Codabar label.
Length in this case includes start, stop or check and data characters, but does not include full ASCII shift characters. This feature
applies when Codabar Length Control is set to variable-length
decoding.
NOTE
Maximum label length should be greater than or equal to minimum label length.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODABAR MAXIMUM LABEL LENGTH
below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that represent the desired maximum label length. The selectable range for
this option is 03 to 50. Pad all single digit numbers with a leading
zero to yield a two-digit entry (03-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODABAR MAXIMUM LABEL LENGTH
Product Reference Guide
5-245