Download PustN0507 - ScholarWorks

Transcript
75
a horizontal (0°) slice across the center of the fisheye image. To calibrate the whole
image, the polarimeter itself was rotated -45º, 0º, 45º,and 90º, while the luminance
standard and polarizer were left in place to obtain slices that covered the whole image
area.
Figure 4.7. Setup used in the fisheye lens calibration. The luminance standard and the
polarizer rotate together in the direction of the arrow for each calibration piece.
One problem with the fisheye calibration is the issue of reference plane. The
fisheye itself rotates the polarization vector. As an example, consider a fisheye lens
viewing the sky dome with the horizon at 90º from the optical axis (because the imager is
looking up). The orientation of the polarizer sets the zero–azimuth angle. Horizontal
polarization is defined as parallel to the horizon. Light incident from the horizon at 0º
azimuth with a vertical polarization vector will be measured to have an angle of
polarization of 0º by the polarimeter; however, light incident from the horizon at 90º of
azimuth with horizontal polarization also will be measured to have an angle of