Download system overview - People(dot)tuke(dot)sk

B&R Automation Studio™
INFO BURST: The monitor mode
successfully installed.
9. Structured Text
must be active in order for the trace to be
Trace: Install:
Trace is installed on the controller. The trace automatically enters the variables
in the memory module. The start point or the recording point can be configured
by you.
Use Start
and Stop
to start and stop the tracer.
Trace: Show Target Data:
When the tracer is in stopped, the "Show Target Data" can be loaded from the
controller.
Fig. 9.3: Tracer Display Window
Training ASINT
Page 9.13