Download PGI - Uticor

Transcript
PowerPanel™ Hardware Manual
9" Monochrome
Battery Life is expected to be at least 1 year.
a. Connect PowerPanel to a computer and following instructions in uWIN
Software User’s Manual, upload the user program from the PowerPanel
to the computer. Save the user program to disk.
b. Disconnect power source.
c. Remove four screws (two per side, as shown in figure below) and lift
back plate from unit.
Remove these
two screws
d. With the PowerPanel top pointed away from you, the battery location is in
the upper-right as shown in figure below. Remove old battery and replace
with a 1/2 AA, 3.6 V Lithium Battery, P/N 28421.
+
–
Battery located here
e. Replace back plate and secure with screws.
f. Reconnect power source, connect to PC, run uWINSoftware and follow
instructions to download the user program previously saved to disk.
79766-7
47