Download Product Guide Fire Detection Systems
Transcript
Chapter 16 Modules, Optical and Acoustic Devices Series 200AP/500 355229 139 Sounder/200APISM/White/Multitone/100dB WMSOU-WW-P34 The addressable loop-powered Multitone Sounder WMSOU-WW-P34 is identical with the Sounder WMSOU-RR-P34, it is however accommodated in a white plastic housing. Cross-references 355222 Page Art.No. Name Type 166 167 168 169 359040 359043 359044 359050 Base Sounder & Strobe/IP24/White LPBW Base Sounder & Strobe/IP44/White SDBW Base Sounder & Strobe/IP65/White WDBW Mounting Plate for Sounder/200/5pcs. DBSPW/5 Sounder-Strobe/200AP/Red/Red/MT/100dB WMSST-RR-P33 The addressable multitone sounder with strobe is accommodated in a red plastic housing and is prepared for outdoor and indoor mounting. The unit is mounted on a base for signalling devices (not provided). The sounder is actuated as a module using System Sensor/200 protocol and is powered via the ADM loop. The sounder is always activated together with the strobe. Depending on the parameter setup of the Fire Detection Control Panel Series BC216 and the system condition, the panel can activate the sounder with tone A or B. The tone type of tones A and B is set via a DIL switch, with selection out of 32 combinations. The sound level is adjustable in 3 steps, but depends also on the chosen tone type. The power consumption is dependent on the tone type and the adjusted sound level. Features 32 different tone type combinations selectable via DIL switch (e.g., continuous tone 660Hz, DIN 33 404 tone 1200 - 500Hz, Slow Whoop tone 500 - 1200Hz) Sound level adjustable in 3 steps (low-medium-high) Long lifespan of strobe due to the use of LEDs Low power consumption 2 decadic rotary switches for setting the address from 01 to 159 Different base versions available Specifications Operating voltage Current consumption from loop Sound level Flash frequency Ambient temperature Relative humidity Protection class Dimensions Ø × D Colour Weight Approvals Cross-references 01 / EX11399E.SAM /1039-01/0100 supply through the loop voltage typ. 450µA (sounder and strobe off) max. 4.7mA (low sound level) max. 6.6mA (medium sound level) max. 9.3mA (high sound level) typ. 82dB(A) / 1m distance (low sound level) typ. 90dB(A) / 1m distance (medium sound level) typ. 96dB(A) / 1m distance (high sound level) max. 100dB(A) / 1m distance (high sound level) 1Hz -25°C to +70°C 10 - 96% (no condensation) IP24 - IP65, depending on the base 115 × 68 (mm) (incl. Base LPBW) red 204g VdS G206072 0832-CPD-0418 Page Art.No. Name Type 166 166 167 169 359040 359041 359042 359050 Base Sounder & Strobe/IP24/White LPBW Base Sounder & Strobe/IP44/Red SDBR Base Sounder & Strobe/IP65/Red WDBR Mounting Plate for Sounder/200/5pcs. DBSPW/5