Download IPDS™ Emulation Programmer`s Reference Manual
Transcript
The Device Control Commands No Operation (NOP) Byte Count D603 Flag CID Data This command tells the printer to perform no operation. Sense Type and Model (STM) Byte Count D6E4 Flag CID This command asks the printer to identify its capabilities. The printer responds with one or more Acknowledge Replies, which contain general information and command set vectors that identify supported IPDS function sets and subsets. Sense Type and Model Acknowledge Reply The following table shows the STM reply format contained in the special data area of the Acknowledge Reply. Note that differences between 4028 and 3816 emulation are indicated with (4028) and (3816). Table 3. Sense Type and Model Acknowledge Reply Offset 0 Value Description X’FF’ System/370 convention X’4028’ X’3812’ Product Code 4028 Emulation 3816 Emulation 3 X’01’ Model 4-5 X’0000’ Reserved 1-2 Command-set vectors in the following format. Refer to individual command-set vectors in the following table. 6-7 Length Length of the command-set vector, including this field. 8-9 Subset ID or Command-Set ID For data command sets, the subset ID of a command set. For other command sets, the command set ID. 10-11 Level or Subset ID For data command sets, the level ID of a data tower. For other command sets, the subset ID of a command set. 12-end Property Pairs Zero or more command-set property ID and data pairs. 27