Download D5000 Signal Analyzer

D5000 Signal Analyzer Hardware Description
CHAPTER 1
ABOUT THIS DOCUMENT
1.1
Scope
This hardware description covers the D5000 Signal Analyzer. The control software is described in the
WITE32 Digital Measurements Test Descriptions Engineer’s Reference.
1.2
Purpose
Provide information to set up, configure, calibrate, and troubleshoot the D5000 hardware.
1.3
Audience
Hardware engineers responsible for the assembly and maintenance of a Guzik Technical Enterprises test
system, including the set-up of the D5000. Knowledge of hard-disk test environments is a prerequisite.
1.4
Revision History
Revision 01 – initial release.
Revision 02 – minor update.
Revision 03 – includes the following updates:
• Section 4.7, Starting the D5000,
• Section 4.8, Powering-off the D5000,
• Section 5.5, TAA Calibration.
Revision 04 – removed references to multi-module configurations, such as multiple DP and multiple ADC
configurations. These options are not supported.
1.5
References
The following Guzik Technical Enterprises test-system documentation is referenced in this document:
•
Read-Write Analyzer 2000 Series User’s Manual
•
V2002 Spinstand User’s Manual
•
Guzik PCI Host Adapter Installation Guide
•
WITE32 Digital Measurements Test Descriptions Engineer’s Reference
•
WITE32 Installation User’s Guide
•
WITE32 System Configuration User's Guide
Guzik Technical Enterprises Confidential
1