Download User Manual

USER MANUAL
PPL7/PPL7-G - V2.8
It is not possible modify the status of the icon by pressing on it; the icon will not change its status. It will only
change its status if it detects leakage or not.
2.1.2.6 PRESENCE SENSORS
Stand-by
Active detector
This icon is used to show the status of the presence detectors of the installation.
Switch on detector
: This icon is used to switch on manually the detector. It means that if you press on
this icon the SRBUS will detect any movement and will work normally.
Switch off detector
: This icon is used to switch off manually the detector. It means that if you press on
this icon the SRBUS will not detect any movement and consequently will not work.
Graphic controls
9/44