Download JP2pro-Controller User Manual

Basic handling method
There are basically two handling methods for this GUI.
(1) Using a MOUSE or the TOUTCH PAD.
You can directly control or select the items by a MOUSE or the TOUTCH PAD.
(2) Using keys on the KEY BOARD.
In this case, you need to select the control zone before typing the keys.
Zone-1 (Select by F1 key): ⑥MAIN CONTROL part and ⑤MARK/SEARCH part
Zone-2 (Select by F2 key): ②REC FILE list part and ③CLIP list part
Zone-3 (Select by F3 key): ①SET-UP menu part
The “Tab” key is used for change the selected part in the zone. When the zone-3 is
selected, the Ctrl + ”Tab” key changes the menu tabs. The “↑ ↓” keys are used for
selecting the items in the list. “Enter” key is used for fixing the selection.
Zone-3（F3 Key）
Zone-2（F2 Key）
Zone-1（F1 Key）
9