Download User Manual

M3B Vital Signs Monitor User Manual
Introduction
Then the icon
displays in the information area. Pressing
the button again can resume the audio system.
CO2
START/STOP
③
TREND/WAVEFORM
④
RECORD
Press to start the CO2 measuring. During the measuring
process, press the button to stop measuring.
Press this button to switch between waveform, trend table and
trend graph display.
Press to print out the currently displayed trend graph, trend
table or alarm list.
⑤
MENU
Press to call up the SYSTEM MENU. Refer to Chapter
SYSTEM MENU for details.
⑥
UP
⑦
OK
Use the UP/DOWN button to select items in menu, and
decrease or increase the items. Confirm the selection by OK
button.
DOWN
The icons on the front panel:
⑧
⑨
CHARGE Indicator
POWER Indicator
The LED besides this icon indicates the charging status.
When the battery is being recharged, the LED is bright.
The LED besides this icon indicates the power status.
When the monitor connects to the mains power supply, the
LED is bright.
3.4 Interfaces
For the convenience of operator, interfaces of different function are in different sites of the
monitor. There is a USB port on rear panel for Data storing function.
Left side of the monitor
At the left side of the monitor there is the recorder’s paper inlet cover (①).
- 15 -