Download Specs - TRS RenTelco

Turning the Unit On, Continued
When to boot
from ROM
Boot from ROM under the following conditions:
• you have a problem loading the TASKCard, or
• you want to operate the power platform without the TASKCard.
Booting from
ROM
To boot from ROM proceed as follows:
Step
1
2
Available
Functions
Action
From the error message screen, press any key. The following
screen is displayed.
Press EXIT to display the Meter Mode Menu.
When you boot from ROM, only the following functions are available.
Function
Scope Mode
One Channel, All Parameters Meter Mode
All Channels, One Parameter Meter Mode
Voltage and Current Phasors
Set Time and Date
Note
4-10
See Page
4-59
4-62
4-64
2-2
No further monitoring or displaying of parameter data is possible without
having a TASKCard installed.
Power Platform-8000 Operator’s Manual