Download Digital Control Unit (DCU) Manual
Transcript
Digital Control Unit User’s Manual Introduction The Digital Control Unit (DCU) is designed to make it easy for you to use the LabPro or Calculator Based Laboratory 2 (CBL 2) digital output lines. Using the DCU and simple programs, you can turn on and off DC motors, lamps, LEDs, buzzers, stepper motors, and other DC electrical devices. You can even develop more elaborate projects, such as robots that move around the room, or automated scientific apparatus. The most exciting projects involve combining the use of sensors connected to the LabPro/CBL 2 with output from the DCU. Examples include alarm systems, temperature-controlled environments, and smart robots. In this new version of the DCU Manual we are also including information on how to control the analog output lines of LabPro. The DCU as a Teaching Tool There are several ways you can use your DCU. • DCU projects are a great way to teach electronics, sensors, feedback and control, and other engineering concepts. The hardware sections of this manual explain how to connect various electrical devices. • DCU projects are a great way to teach programming. Many programming project ideas are given in this book. This manual and the sample programs can provide a good place to start. We hope you will take our programs, examine them, add to them, and make your own programs. • The DCU can provide a useful tool for student (or teacher) projects. Use one of the many projects listed here or create your own. The sample programs we provide may do what you need or most of what you need. If so, start with that program and modify it as necessary. Use the subroutines we provide as building blocks for your own programs. • Teaching the basics of digital and analog output and control can be accomplished without introducing programming in several different ways: - Computer users can use the Digital Control Unit with Logger Pro 3.3 and newer versions. Logger Pro is a general-purpose data collection program for LabPro and Vernier Sensors, but it also supports setting up the DCU to turn on or off digital devices when a sensor reading reaches a specified limit. You can also set the digital lines to come on at specified times. Logger Pro also allows you to control the LabPro analog output line. - Computer users can also use the simple applications that we provide on the CD to control the DCU lines and the analog output lines. There are applications for Windows®, Macintosh® OS 9, Macintosh® OS X, and Linux® - Calculator users can use the calculator programs as they are on the CD with no programming required. DCU Project Ideas Over the years, we have used the Digital Control Unit for dozens of projects, some whimsical and some practical. Here are some of the projects we have built at Vernier. You probably have some better ideas of your own. • Turn on and off DC motors and operate them in either of two directions • Control stepper motors or servo motors • Create temperature-controlled environments • Add a buzzer to the LabPro/CBL 2 to warn you when an event occurs, such as a person walking near a motion detector • Make live traps for small animals or bugs, activated by a sensor detecting the presence of the animal • Create an automatic tea brewer • Make automated scientific instruments and demonstration equipment • Control flashing lamps and LEDs and moving objects for marketing displays 1