Download Hydroshear Plus User Guide

Chapter 3: Installing the Hydroshear Plus
3.5
INSTALLATION
Take care when working with the syringe;
although the Hydroshear Plus syringe is
designed for higher pressure, it is made of
glass and could shatter under high pressure!
Wear protective eyewear whenever the plastic
door to gain access to the syringe is open.
Please follow the instructions below before using a new Hydroshear Plus syringe to ensure
that the syringe and plunger are aligned correctly with the valve assembly.
1.
Lower the plunger mount on the pump. Since the plunger mount cannot be lowered
manually with the Hydroshear Plus turned off, turn on the Hydroshear Plus using
the switch on the rear of the unit.
2.
Start the Hydroshear Plus software on the attached PC. The main Hydroshear Plus
control panel is as follows:
3.
On the main Hydroshear Plus control panel, click on “MANUAL OPERATION” to
access manual syringe controls:
Hydroshear Plus User Manual
Page 28