Download HiPath 1100

Programming an Extension
Step by Step
Overflow/Escape Extension
An Overflow Extension (Escape Extension) is configured to answer calls only when the extension called is
not available.
Examples:
•
The extension called is activated for room monitoring (Babyphone)
•
The extension that was programmed as the first
attendant is currently assigned as Door Opener
•
No extension is configured (all extensions were
deleted using the code "42").
By default, the first extension of the system is configured as the Overflow Extension for Busy signal or
Wrong Number.
Required: Programming Mode must be active (*95
31994).
3 2
1
...
3
Enter the code for programming.
Choose a list for Call Forwarding:
1 = No answer
2 = Busy
3 = Wrong number
Enter the extension number (e.g., 12 /102) to be added
to the list.
Initial state for Programming Mode.
The Overflow Extension is accessed using your
own internal number.
The Overflow Extension cannot be configured or
used for Fax.
60