Download Block adjustment

Block adjustment
PHOTOMOD 6.0.2
Fig. 8. Parameters of adjustment of central projection images block
In order to setup adjustment parameters perform the following actions:
1. Specify coordinate system of a project on the Coordinate system tab.
2. Select the adjustment method and setup main parameters of adjustment on the
Adjustment tab.
3. Setup display of adjustment results on report and define adjustment residuals
threshold using the Report tab.
4. Click the Compute button to start the adjustment operation or click OK to save the
settings and close the Parameters window.
7.2. The “Coordinate system” tab
The Coordinate system tab allows to specify coordinate system, if it wasn’t specified
on project creation stage, or allows to change current coordinate system (see “Coordinate
system selection” chapter in the “Project creation” User Manual).
It is not necessary to define coordinate system for block adjustment in free model.
21