Download 2014 USER MANUAL TRANSIT RACKS

3. Loosely assemble each Blue Bird bracket piece to the bumper via the newly drilled
holes. Assemble the pivot plate assembly to the Blue Bird bracket pieces. Tighten
all bolts once together. This assembly is the mounting bracket. See Figure 25. The
mounting bracket is now installed.
Installation
Fig. 25
You are now ready to install the Sportworks bike rack to the mounting bracket. Refer to
MOUNTING THE BIKE RACK at the end of this section.
INSTALLATION KIT
Install to Blue Bird TC/CS Stock Bumper
1.
2.
3.
4.
1 each
1 each
1 each
1 each
Drill jig template
1/4" transfer punch
1/4" pilot drill
17/32” drill
- 29 2014
USER MANUAL