Download GX Developer Version7 Operating Manual

4 MONITORING AND TEST FUNCTIONS
MELSOFT
4. MONITORING AND TEST FUNCTIONS
MELSAP-L has the following monitoring and test functions.
[Monitoring]
• SFC diagram monitor
• All-block batch monitor
• Block list monitor
• Device batch monitor
• Device registration monitor
• Buffer memory batch monitor
• Program list monitor
• Interrupt program list monitor
4
[Test]
• Device test
An explanation of monitoring and testing in MELSAP-L is set out below.
For details of operating the device batch monitor, device registration monitor, buffer
memory batch monitor, program list monitor, and interrupt program list monitor
functions, refer to the GX Developer operating manual.
4.1 SFC Diagram Monitor
This operation is used to monitor the operation and control status of the PLC CPU with
SFC diagrams and to conduct test operations.
[Operation procedure]
When monitoring
[Online]
[Monitor]
[Monitor mode] or
( F3 )
When stopping monitoring
[Online]
[Monitor]
[Stop monitor] or
( Alt + F3 )
When resuming monitoring
[Online]
4-1
[Monitor]
[Start monitor] or
( F3 )
4-1